W.A.S. ’d Shockers

I found the video at www.pbvids.com

http://perso.wanadoo.fr/dyeman06/video%20shocker2k3/wasdshoc ker2k3.mpeg

just cause the gun is fast, doesnt mean your going to be fast.

im sick of the hype where a gun is good only if you have high bps.

thanks, and i disagree, the was boards can shoot faster than the stock board in the shocker cause it resets the trigger quicker, allowing to hit it quicker.

just set the rate of fire up on the stock board by holding down the trigger while the gun is on and adjusting the dwell down all the way, this allows the trigger to reset faster.

^^^Don't get a WAS board, they're a rip off. They don't make the for the Shocker yet, they use Timmy boards and fit them in by cutting up the body of your gun and drilling holes and adding JB Weld for the new eyes. And it costs like $300 because you have to buy the board and then pay someone to do the custom modifications. If you want a fast new board, pick up a Dynasty Tadoa board. They cost $140, but they're a drop in upgrade, you just take the stock board out and put the new one in. Take 30 seconds, and you're not permenantly altering your marker. And the Dynasty board is a way better board, it's faster than stock and just as fast as WAS because it has adjustable debounce and anti-mechinical bounce, set it on Debounce 1 and AMB 1 and it'll run away like hell, or turn AMB up just a little, and you can fire it slowly and it won't bounce, so you can get away with it if you get checked. Plus it has other really nice features, like Anti-Bolt Stick, so you don't get drop off, it raises the dwell if you don't shoot for more than 10 seconds to further prevent drop off, and the eyes are auto on with it. The only thing WAS has that the Dynasty board doesn't is break beam eyes, which are all hype anyways, reflective work just as good.