98c E-Bolt

I've been playin speed ball for a good couple of months now with pretty much a stock 98c i want to beef up the firepower but keep the tippmann any advice on the E-Bolt

I suggest the Ballistic E-bolt all around better choice of e-bolt / lp reg. I would also suggest a regulator and compressed air if your not already using it.
I own and use the ballistic sprt setup and this kit is great. It can shoot 14bps about 13bps constant, "30bps" on semi with tourny lock on, modes are changed by a flick of the on/off switch and by pressing the trigger, and it also has a much better low pressure regulator as i sated before.

ballistic e-bolt

More about the kit

Yes you can but, you should buy a high pressure compressed air tank and then just regulate it with your front regulator. You CaN put the lp kit on this set up as well.

If you have the extra money yes but, you really don't "need" it. If you get an e-bolt kit the the onl thing that you will get any use out of the low pressure kit will be the 2 way vertical adapter and the low pressure res. (chamber).

i would recommend not buying an e-bolt or an lp kit.  the lpk is a money maker for tippman and is really cool if you have cash to burn, but it's too expensive and isn't very advantageous.  The e-bolt is extremely expensive, too, but actually will be good... as long as it doesn't break, which they are prone to doing.  Try putting a set screw through your trigger to set it closer to the firing position and shortening your overall trigger pull.  check www.model98.net and look at the magnetic trigger mod.  Do the last suggestion and you can fine tune the trigger pull.  Unless you are really dead serious about your velocity being exact, you don't need any kind of regulator.  Just go with an x-chamber and you should be alright.

im pretty sure its faster and better performing, personlly i am aginst the e-bolt, it gives the gun a wierd look, is still pretty slow, its price tag!,  i say get a new gun ull be happier, but if u have cash to burn and u cant think of anything else to get get the e-bolt

lpk- dont get it at all, not worth it it doesnt do much, even Enos is aginst it

WebHalex wrote: TippmannEffect wrote: I suggest the Ballistic E-bolt   why not tippmanns ebolt ?

ballistics is better in many ways

This article may be useful to you: http://www.model98.net/articlesgtavsbsi.html

the BSI is overall better, u can go with a palmer reg, and an anti-syphon tank if u dont have the $$$ for HPA