tape mod

what kind of tape shoud i wrap the pin with? no one says how in their instructions.

this mod

It doesn't really matter. You can use electrical tape, duct tape etc. Don't use crappy stuff or in might wear down.

i used hocky sock tape, I do recomend this mod thanks for supporting use of my site. I played 3 games and test fire my tippmann all the time and only thing diffrent is a shorter trigger pull, hint put a small tade of super glue between layers of tape.


Edited by Mag-a-Man

just finished using electrical tape with super glue between layers it worked great thanks for all the help

People who are like

ultmate98 wrote: i wouldn exactly recomend that for a 98.

have not done this mod successfully. This mod is so sweet, that i cannot use my safety anymore. It has to be around a 1mm trigger squeeze. If this mod is done well, you will need some trigger stops.

What you are all missing is that when you do this mod, you reduce the size of the area that the sear catches the rear bolt. Yes it will reduce the length of the trigger pull, but the sear and the bolt are catching on the very edge. So keep in mind that you will reduce the life expectancy of the sear. The edge will chip off and round off untill it doesn't catch anymore.

buy an extra sear now, you will need it soon.

Sears are cheap. Stock up on them.