Intippmandator

Ok, posted here cause its customizing..alot.
Im thinking of doing this real soon, probably in the next couple days.
Itll be a 98c, with a
nexus ram(possibly QEV's)
intimidator 12 point
intimidator 14 point
intimidator noid
timmy(got tired of spelling it) eyes
SOB board to start off with, then later WAS board
EYES!!

Alright, so to start off, the 98 will look totally stock(no ram housing hanging off the back(ebolt) and it wont need a weird screw in lpr)

So here we go.
1. Getting the nexus ram in there.
I will use the back end cap of the tippmann, drill a hole in the center of it, and get a screw thats the same threading as the nexus ram front hole, screw the screw through the back hole, into the ram and tighten it down.

There shoudl be enough room to do all this, and there wont be anything sticking out of the back, except for the tiny screw that holds the ram in place.

1b
i then also have to find a peiece of metal, drill and tap it so i can stick it on the end of the ram rod, so that when air flows through and fires the ram, it will shoot back and hit open the valve for the tippmann.

2.Hook all the timmy electronics and everything up, get all the microline and everything hooked up to the ram(itd act basically the same as a timmy ram would, or the same as a cocker ram.)

3.Drill holes for the eyes :) another problem i might have would be getting the eyes to go all the way up to where the balls feed in....

Yep..thats a crude layout of what ill be doin, it should work, the only problems im anticipating(sp) is lack of room, the eye problem) and maybe the ram not hitting the valve hard enough to get the velocity up.

Why would i do such a thing you ask? why not? this whole project should cost less than like 200$, and will be friggen awesome, think about it, see some kid come up to the field, looks to have a totally stock tippman with some weird wires on both sides, and a halo(ha!) you think to yourself, this is gonna be fun, then you hear someone rippin it up at the chrono...tippy boy was the only one headed that way...what the?!

Schwing. Feel free to post what ya think, pros, cons, and any other small problems i may have looked over.

Looks pretty cool... post pics and a vid when you're done.

I wasn't reffering to the gun, I mean't the idea was cool.