Low Pressure Kit...

For those of you who are thinking of upgrading to the lpk, here are the insides and a few things you could do with it.

First here is the stock kit which you can just drop in and use mechanically.  Of course you need to buy a separate regulator to drop the pressure.



The changes from the stock kit are as follows:
-modified valve for low pressure
-t fitted vertical adapter
-low pressure chamber
-rear bolt assembly lightened

Here are the changes in the valves

CVX valve standard (top)
CVX valve LPK (bottom)



Spring differences



Completed LP valve



Here is the stock low pressure assembly stock (just without the valve)



You can drill and tap a gauge for the lp chamber





-------Mech, Electopneumatic, Co2, HPA, Stock and lightened hammer and all cominations thereof will be tested and posted here shortly-------

I thought I might post this because many people have asked for it.

Edited by FA22RaptorF22 - 30 May 2006 at 4:21pm

You would want the guage on the left side if your right handed and wanted to actually look at it.  Otherwise it would be on the far side of the marker.  

you can turn the gauge wherever you want it (lp chamber being round...) and are you saying that i don't know much about valves :-???

o and i forgot to update this...i did it on tippy owners...

Not to dig up my old thread or something (this is stickied on tippmannowners.com) but, paintballpimpin>>

PaintballPIMPIN wrote: why would u want the guage on the left side??..

Well apparently you like it on the left side becuase of the way you just set up your gun in your sig...contradiction...ehhh