clippard qev mev-2

This is from The super rt qev mod

What You Will Need:
-1/8" Flow Control Adjuster (10/32 threading)*
-Banjo "T" Fitting (or regular Banjo Fitting without cyclone)*
-1/8" ID Line (gun to adjuster)*
-Clippard MEV (or QEV of your choice)
-Pack of 1/8" barbs
-1/8" ID Line (gun to QEV)

If you click this  http://www.clippard.com/store/display_details.asp?sku=CT4-PK G I think it should be it and you get 5 of them in that pack.

I'm also in the middle of buying the parts from clippard and from tippmannparts.com for this mod but I'm a little stuck with a different problem --> the hose I need to get.  Maybe you could help me out and let me know what hose to get. 

If you could kinldy click the thread link and scroll to the bottom of that page.  That is where I have my question about the type of hose i need for the mod.

http://www.tippmann.com/forum/wwf77a/forum_posts.asp?TID=152 632&PN=1&TPN=3

It's inbetween #URH1-0804-BLT-050 

http://www.clippard.com/store/byo_tubing/?sku=URH1-0804-BLT- 050 

and #URH1-0402-BKS-050

http://www.clippard.com/store/byo_tubing/?strSize=URH1-0402& amp; amp;strColor=BKS&strLength=50&sku=URH1-0402-BKS-050

its a different psi tube i think i dont know. if your buying the 1/8 fitting then go with the 1/8 hose.   macro line will work.

plus if you buy that i think you get like 50ft

FarSeer wrote: phil_stl wrote: ya but the deal is both of them are 1/8 hose but here is what the first one says: 1/4" O.D. & 1/8" I.D.and the second one is: 1/8" O.D. & 1/16" I.D. What is the difference between the O.D. and I.D. because they are both 1/8 but one is O.D. and one is I.D.??? That's the one you want.

Which one??

1/4" O.D. & 1/8" I.D.

or

1/8" O.D. & 1/16" I.D.

????

OD = OUTSIDE DIAMETER

ID = INSIDE DIAMETER

if your fitting is 1/8 then you need 1/8 ID to fit it