LPR

Aren't LPR's only used for solenoids, like with the ebolt? If you mean a secondary reg for the LP kit, I reccomend the Bob Long Torpedo. As for setting regs, it differs with manufacturer.

Edited by Benjichang

Yea, lpr's are for adjusting cycling pressure and other super-low pressure needs (0-100psi).

If you get the LPK you'll need either:

#1 Preset Tank and 2ndry Regulator
#2 Adjustable Tank and Gas-Thru Grip

The best 2ndry regs are Palmers Stabilizers and Akalmp Sidewinders. There are other good ones, but you'll want a high-pressure 2ndry reg for a Tippmann. A Bob Long Torpedo would be a great choice if you're tight on $$$.

You can get the reg and a tank and then get the LPK later if you want. You'll need a vertical adapter as well if you're not getting the LPK first.

Edited by warbeak2099

and i would have to get an inline reg right? so it can go through the vertical adaptor i will have to put in the grip so the lpk can come out in front of the trigger guard

If you have a Tippmann don't get a LP preset tank. Even if you have the LPK, you need an HP preset tank. If you get the LPK you will need either one of the two setups I already listed above. Read my previous post again. If you don't get the LPK you can use the HPA tank without any other addons.