Model 98 double trigger

i have an old school model 98 and i just succesfully put a double trigger on it, i was not that hard with some jb weld and a dremel it was easy has anyone else done this? i have seen it done but not many

yeah i have heard and seen people do it and i got an idea and just did it and it works good i like it alot

Duechy wrote: Did use a m98 trigger or mod a 98c trigger? If you modded a new one I'm curious as to how you did it.

i moded a 98 custom trigger is what i did was i took the stock trigger and cut off the little arm that the return spring hooked onto and sanded it to make the cut smooth and i jb welded it to the double trigger, then i used an angle grinder(you can use a dremel with a cut off wheel) to cut off the trigger guard then i used a dremel tool and milled out a section for the trigger guard to sit in on the inside and on the guard there is a square block i sanded that down with a bench grinder so i did not have to mill so far into my gun, the only thing i did not get to attach was the bottom mount because when i cut off the old guard i did not leave enough material so i just cut off the end and it is long enough that it sits firm and stiff to the gun and you can only tell it is not attached unless you look at it real good and that was it it took me about 30min to do it if you want i can post some pictures

(if you do it an hurt yourself or screw it up dont blame me) lol

Edited by paintballer40 - 25 May 2007 at 4:25pm