Tippmann Paintball Homepage
Forum Home Forum Home > Tippmann Paintball > Paintball Ideas / News From Tippmann
  New Posts New Posts
  FAQ FAQ  Forum Search   Register Register  Login Login

What did I do?
 Post Reply Post Reply Page  12>
Author
Message Reverse Sort Order
  Topic Search Topic Search  Topic Options Topic Options
Blue Hopper View Drop Down
Member
Member
Avatar

Joined: 20 June 2004
Location: United States
Status: Offline
Points: 841 		Post Options Post Options   Thanks (0) Thanks(0)   Quote Blue Hopper Quote  Post ReplyReply Direct Link To This Post Topic: What did I do?
    Posted: 18 December 2004 at 4:12pm

Originally posted by A5 dude15 A5 dude15 wrote:

Originally posted by Frozen Balls Frozen Balls wrote:

Originally posted by tippy_182 tippy_182 wrote:

Originally posted by mod98commando mod98commando wrote:

He means that it'll essentially be full auto but the bolt will cycle so fast that no feed system could even attempt to feed fast enough. I don't remember the exact cycle rate of the valve but Enos says 30-40 cycles per second and that sounds good enough for me, I just remember that it cycles very fast. Regardless of the number, you can't feed fast enough to make use of the full auto effect and you'll end up breaking paint or, if you're lucky, just dry firing. You can easily stop that by shutting off the air supply (if you have an on/off) or you can simply grab the cocking knob on the rear bolt. If you released the trigger then the sear should catch the bolt again but that burst you fired probably would have either chopped a ball or fired nothing but air. You're better off sticking to semi-auto or buying a ROF upgrade (double trigger, RT, Ebolt).

 
I wonder if a Q-loader could support that..........


it wouldn't matter. The gun itself would beat the crap out of the paint.
yes a q loader could keep up with it (it feeds 100 balls in 1.5 seconds), but the cyclone system only feeds 15, so a hundred balls would tryin to be goin in to the cyclone and it can only feed 15

Whered you hear that about the q loader
Back to Top
A5 dude15 View Drop Down
Gold Member
Gold Member
Avatar
Guested Pottymouth

Joined: 21 June 2004
Location: United States
Status: Offline
Points: 2146 		Post Options Post Options   Thanks (0) Thanks(0)   Quote A5 dude15 Quote  Post ReplyReply Direct Link To This Post Posted: 17 December 2004 at 11:45pm

Originally posted by turbo-archer turbo-archer wrote:

Hey, y'know, look at the bright side, if it chops balls in half, it'll spray paint all over, so it would make a great bunkering gun!  Clap
ummmm........no

 
Back to Top
A5 dude15 View Drop Down
Gold Member
Gold Member
Avatar
Guested Pottymouth

Joined: 21 June 2004
Location: United States
Status: Offline
Points: 2146 		Post Options Post Options   Thanks (0) Thanks(0)   Quote A5 dude15 Quote  Post ReplyReply Direct Link To This Post Posted: 17 December 2004 at 11:44pm
Originally posted by Frozen Balls Frozen Balls wrote:

Originally posted by tippy_182 tippy_182 wrote:

Originally posted by mod98commando mod98commando wrote:

He means that it'll essentially be full auto but the bolt will cycle so fast that no feed system could even attempt to feed fast enough. I don't remember the exact cycle rate of the valve but Enos says 30-40 cycles per second and that sounds good enough for me, I just remember that it cycles very fast. Regardless of the number, you can't feed fast enough to make use of the full auto effect and you'll end up breaking paint or, if you're lucky, just dry firing. You can easily stop that by shutting off the air supply (if you have an on/off) or you can simply grab the cocking knob on the rear bolt. If you released the trigger then the sear should catch the bolt again but that burst you fired probably would have either chopped a ball or fired nothing but air. You're better off sticking to semi-auto or buying a ROF upgrade (double trigger, RT, Ebolt).

 
I wonder if a Q-loader could support that..........


it wouldn't matter. The gun itself would beat the crap out of the paint.
yes a q loader could keep up with it (it feeds 100 balls in 1.5 seconds), but the cyclone system only feeds 15, so a hundred balls would tryin to be goin in to the cyclone and it can only feed 15
Back to Top
turbo-archer View Drop Down
Member
Member
Avatar

Joined: 14 July 2004
Location: United States
Status: Offline
Points: 8 		Post Options Post Options   Thanks (0) Thanks(0)   Quote turbo-archer Quote  Post ReplyReply Direct Link To This Post Posted: 21 July 2004 at 2:14pm
Theoretically. Embarrassed
Back to Top
turbo-archer View Drop Down
Member
Member
Avatar

Joined: 14 July 2004
Location: United States
Status: Offline
Points: 8 		Post Options Post Options   Thanks (0) Thanks(0)   Quote turbo-archer Quote  Post ReplyReply Direct Link To This Post Posted: 21 July 2004 at 2:13pm
Hey, y'know, look at the bright side, if it chops balls in half, it'll spray paint all over, so it would make a great bunkering gun!  Clap
Back to Top
mod98commando View Drop Down
Platinum Member
Platinum Member
Avatar

Joined: 10 June 2002
Location: United States
Status: Offline
Points: 4432 		Post Options Post Options   Thanks (0) Thanks(0)   Quote mod98commando Quote  Post ReplyReply Direct Link To This Post Posted: 20 July 2004 at 9:21pm
There was probably something on it (dirt maybe) that was making it get stuck and taking it out made the dirt or whatever fall off.
oreomann33: Everybody invades Poland

Rofl_Mao: And everyone eats turkey

Me: But only if they're hungary

Mack: Yeah but hungary people go russian through their food and end up with greece on everyth
Back to Top
hashi2008 View Drop Down
Gold Member
Gold Member
Avatar
Strike 1 - Racial Slur

Joined: 14 June 2004
Location: United States
Status: Offline
Points: 1267 		Post Options Post Options   Thanks (0) Thanks(0)   Quote hashi2008 Quote  Post ReplyReply Direct Link To This Post Posted: 20 July 2004 at 8:58pm
 I did something to my sear. It would go full auto for about 4 shots, then sometimes it would un-cock. I didn't mean to do it, but whatever I did, I fixed it by opening my gun and taking out the sear and putting it back in.
Founder of the "Forumers Against the Ugly Woman Sigs" also known as FAUWS.
Back to Top
travis75 View Drop Down
Gold Member
Gold Member
Avatar
Dear Penthouse....

Joined: 01 June 2004
Location: Great Britain
Status: Offline
Points: 1657 		Post Options Post Options   Thanks (0) Thanks(0)   Quote travis75 Quote  Post ReplyReply Direct Link To This Post Posted: 20 July 2004 at 8:23pm

Originally posted by BigGun BigGun wrote:

made the cat pee in the corner.

LMAO

 
Hey MPAA, Guess what?

09 f9 11 02 9d 74 e3 5b d8 41 56 c5 63 56 88 c0!
Back to Top
BigGun View Drop Down
Member
Member
Avatar
Strike 1: Flaming and general idiocy

Joined: 09 July 2002
Location: United States
Status: Offline
Points: 355 		Post Options Post Options   Thanks (0) Thanks(0)   Quote BigGun Quote  Post ReplyReply Direct Link To This Post Posted: 20 July 2004 at 7:59pm
Ok, what you just did there was the "stick in the sear trick". It does look and sound cool, but is useless, and yes, if you continue to do it, it will brake your gun.
I did that once and just dry fired it, I blew the blinds off my window, blew papers all over my room, nocked over two glasses of water, tore several posters off of my wall, knocked my guitar over, made my mom freak out, and made the cat pee in the corner........so, it was a BAD thing, not an UBER thing.
And like they've already said, it will never shoot paint, not even the A-5 cyclone feed will feed it. You might think that the A-5 would be able to feed it being that the cyclone feed inserts a ball everytime the gun is shot, but with what you just did, it shoots it so fast that the cyclone just sits there and does nothing. But you have a 98c, so it doesn't matter. Regardless, it's bad for your gun one way or the other.
A-5 w/ 12IN. Lapco Bigshot.
R/T
20oz. and 16oz. tanks.

98c with 14In. Terminator
14oz. and 9oz. tanks.
Back to Top
Frozen Balls View Drop Down
Platinum Member
Platinum Member
Avatar
Strike 1, filter dodge, 1.28.10

Joined: 14 June 2004
Location: United States
Status: Offline
Points: 5865 		Post Options Post Options   Thanks (0) Thanks(0)   Quote Frozen Balls Quote  Post ReplyReply Direct Link To This Post Posted: 20 July 2004 at 5:35pm
Originally posted by tippy_182 tippy_182 wrote:

Originally posted by mod98commando mod98commando wrote:

He means that it'll essentially be full auto but the bolt will cycle so fast that no feed system could even attempt to feed fast enough. I don't remember the exact cycle rate of the valve but Enos says 30-40 cycles per second and that sounds good enough for me, I just remember that it cycles very fast. Regardless of the number, you can't feed fast enough to make use of the full auto effect and you'll end up breaking paint or, if you're lucky, just dry firing. You can easily stop that by shutting off the air supply (if you have an on/off) or you can simply grab the cocking knob on the rear bolt. If you released the trigger then the sear should catch the bolt again but that burst you fired probably would have either chopped a ball or fired nothing but air. You're better off sticking to semi-auto or buying a ROF upgrade (double trigger, RT, Ebolt).

 
I wonder if a Q-loader could support that..........


it wouldn't matter. The gun itself would beat the crap out of the paint.

Back to Top
jigglydude View Drop Down
Gold Member
Gold Member
Avatar
My title got <krl>’ed

Joined: 16 September 2003
Location: United States
Status: Offline
Points: 4148 		Post Options Post Options   Thanks (0) Thanks(0)   Quote jigglydude Quote  Post ReplyReply Direct Link To This Post Posted: 20 July 2004 at 3:44pm
oooo my bad didnt look at the pics
Back to Top
paintballer90 View Drop Down
Member
Member
Avatar

Joined: 14 July 2004
Status: Offline
Points: 8 		Post Options Post Options   Thanks (0) Thanks(0)   Quote paintballer90 Quote  Post ReplyReply Direct Link To This Post Posted: 20 July 2004 at 11:01am

hiHI
Back to Top
PbSplintercell View Drop Down
Member
Member
Avatar
Posting on borrowed time

Joined: 26 October 2003
Location: Iraq
Status: Offline
Points: 757 		Post Options Post Options   Thanks (0) Thanks(0)   Quote PbSplintercell Quote  Post ReplyReply Direct Link To This Post Posted: 19 July 2004 at 11:20pm
am i the only one who caught teh obsinity a different word for teh f-bomb
<thanx enos

Back to Top
A5 dude15 View Drop Down
Gold Member
Gold Member
Avatar
Guested Pottymouth

Joined: 21 June 2004
Location: United States
Status: Offline
Points: 2146 		Post Options Post Options   Thanks (0) Thanks(0)   Quote A5 dude15 Quote  Post ReplyReply Direct Link To This Post Posted: 19 July 2004 at 10:35pm
hooly crap thats a lot!!!!!!!!!!!!!!!!!!!!!!  whats the fastest feeding hopper and how many balls does it feed per second?thanx
Back to Top
[Deadeye] View Drop Down
Member
Member


Joined: 15 July 2004
Status: Offline
Points: 166 		Post Options Post Options   Thanks (0) Thanks(0)   Quote [Deadeye] Quote  Post ReplyReply Direct Link To This Post Posted: 19 July 2004 at 10:29pm
i think i might make a video of it, its the fastest ive ever even seen the bolt on a 98c move lol
Back to Top
mod98commando View Drop Down
Platinum Member
Platinum Member
Avatar

Joined: 10 June 2002
Location: United States
Status: Offline
Points: 4432 		Post Options Post Options   Thanks (0) Thanks(0)   Quote mod98commando Quote  Post ReplyReply Direct Link To This Post Posted: 19 July 2004 at 9:49pm

Originally posted by tippy_182 tippy_182 wrote:

I wonder if a Q-loader could support that..........

I doubt it. I know those things feed fast but I don't think even they could keep up with that. Also, the reason it didn't come out of full auto when you released the trigger is because the bolt wasn't able to travel back far enough to catch on the sear. The bolt is really just bouncing off of the valve when you do that and it isn't a never-ending cycle. It slowly dies down so after a certain point, the bolt won't go back far enough to catch on the sear. That's another reason why you can't use that method to get automatic fire. Doing this shouldn't cause any damage to the gun as long as you don't do it extensively. When the gun cycles that quickly the parts will wear faster but if you don't do this a lot then your gun shouldn't be affected much at all by it. You don't have to worry about your gun exploding or anything but if you do this too often then you might wear out your internals faster.
oreomann33: Everybody invades Poland

Rofl_Mao: And everyone eats turkey

Me: But only if they're hungary

Mack: Yeah but hungary people go russian through their food and end up with greece on everyth
Back to Top
sinisterNorth View Drop Down
Moderator Group
Moderator Group
Avatar
1 strike, language, 10/3

Joined: 30 May 2004
Location: PA
Status: Offline
Points: 10463 		Post Options Post Options   Thanks (0) Thanks(0)   Quote sinisterNorth Quote  Post ReplyReply Direct Link To This Post Posted: 19 July 2004 at 9:19pm
That seems kinda shakey to be doin. I just hope you dont destroy your gun in the process.
Pumpker'd; (V.) When a pump player runs up and shoots you at point blank range because you thought 20bps made you good.
Back to Top
[Deadeye] View Drop Down
Member
Member


Joined: 15 July 2004
Status: Offline
Points: 166 		Post Options Post Options   Thanks (0) Thanks(0)   Quote [Deadeye] Quote  Post ReplyReply Direct Link To This Post Posted: 19 July 2004 at 3:11pm
well i tested it... it was full auto going about 30bps... it was even full auto when i let go of the trigger.... which was weird cause i had to grab the bolt in order to stop it
Back to Top
tippy_182 View Drop Down
Platinum Member
Platinum Member
Avatar

Joined: 05 February 2004
Location: United States
Status: Offline
Points: 2591 		Post Options Post Options   Thanks (0) Thanks(0)   Quote tippy_182 Quote  Post ReplyReply Direct Link To This Post Posted: 19 July 2004 at 12:55pm
Originally posted by mod98commando mod98commando wrote:

He means that it'll essentially be full auto but the bolt will cycle so fast that no feed system could even attempt to feed fast enough. I don't remember the exact cycle rate of the valve but Enos says 30-40 cycles per second and that sounds good enough for me, I just remember that it cycles very fast. Regardless of the number, you can't feed fast enough to make use of the full auto effect and you'll end up breaking paint or, if you're lucky, just dry firing. You can easily stop that by shutting off the air supply (if you have an on/off) or you can simply grab the cocking knob on the rear bolt. If you released the trigger then the sear should catch the bolt again but that burst you fired probably would have either chopped a ball or fired nothing but air. You're better off sticking to semi-auto or buying a ROF upgrade (double trigger, RT, Ebolt).

 
I wonder if a Q-loader could support that..........

Back to Top
[Deadeye] View Drop Down
Member
Member


Joined: 15 July 2004
Status: Offline
Points: 166 		Post Options Post Options   Thanks (0) Thanks(0)   Quote [Deadeye] Quote  Post ReplyReply Direct Link To This Post Posted: 19 July 2004 at 11:21am
well i was just messing around... as i said, i didnt actually attempt to make it full auto.... i will test this in a minute, but i just dont want my gun to get messed up
Back to Top
 Post Reply Post Reply Page  12>
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 12.04
Copyright ©2001-2021 Web Wiz Ltd.

This page was generated in 0.391 seconds.