Here is my tippy

Alot of add ons but some custom work. I cut out a section of the shroud to fit the warp feed and it fits real nice and tight. I put a custom switch on the warpfeed b/c it doesn't come with an on/off switch. Uses 2 12V but I am gonna opt for a Qloader b/c there is 5 9volts in my marker between the warp feed the revi and the ebolt. Kinda ridiculous but it works great. I am definitely gonna swap out the revi and the warp for a qloader. No batteries and alot lighter. But if you dont like the small size of the qloader then A warp feed is great for lowering the profile. Lemme Know what you guys think

yeah, get a double trigger,and a new barrel,. ANd lastly do a quickstrip mod.

Not really for speed ball. I just wanted to lower the profile. With a qloader it will be alot tighter and more compact. Kinda depends on how I position the tank to. I could always invert it. I wouldnt use this for speed ball. Id use an Emag or something. Im not too into speed ball. Its fun but I am not on a team or anything so I like scenerio and woodsball. I jam on some speed ball sometimes. Flatline is rather legthy but a model 98 is anyhow.

A nintendo button, thats an original idea 8/10, if and when you do get it to work like that, let me know, I might try it

 

 

It wouldn't be tooo hard. Youd just need so solder some stuff and maybe mod out a section of the chip where the a button make contact. It would be a little anoying b/c youd have to run a low voltage through the chip and then setup something to read when the voltage is cut and have that piece make the switch in the E trigger connect but you could skip the original chip board all together and just make your own switch, make it real real sensative with a nice spring and then mount an a button over it. it would be cool though but definitely not tourney legal. Hey I wonder what the B button would do o_O!!!

8/10, cause i dont liek the color scheme

but other than that

I suggest, get rid of the flatline, get rid of the warp, centerfeed it, get a doulbe trigger and another barrel.

Well I like the warp actually With the marker as long as it is it has a lower profile and it does help with a marker that large. But I will get a qloader b/c I like the idea of just clipping in clips @ 100 balls at a time. Its fast and low frofile and very light. I think the very light aspect is while I'll get one. Enough w/ the 9 volts ya know. I already need one in the marker. As for the flatline I dont think I'll ditch it b/c its alot of fun at scenerio games. I might just get a different marker down the road for sped ball and games in closer quarters. I love the flatline though. Its a very debated barrel. I dunno it works good on my piece. As for the Ebolt not giving enough vibration to set of the warp feed. it has enough w/ out the low pressure kit but I hear if you switch to an LP kit it makes the gun barley move at all. But I happen to like the DYE throttle tank I have. its 70ci 4500psi and thats plenty of shots for me even w/o a LP kit. Might get one down the road. The color of the model 98 is awsome. Here is the best part... I bought it for $40.00 on a table at DDAY at skirmish last year. It was great. I used to have a solid chrome mini mag but I sold it to my friend. I saw this lying on the table and I couldnt believe it was $40. I didn't really care that it wasn't a custom. Tippmann milled it out for free and put in the ebolt so I was very happy when I got it back. But for $40.00 yous couldn't go wrong. So I added some love. But warp feeds are very good especially if you use 2 9 volts. I put an on/off switch my self and the 2 X 9v to 12V output piece in there also. I am very happy that I was able to keep the open and close button on the shroud b/c it came very very closeto having to cut that off. But the pro feed I have clipped in there so nice and I don't have the tube sticking out of the top so I kinda like the flat line shroud there. It like looking down the barrel of a regular gun (almost). Oh to Pink Panther.... If I did that it would be your marker. I kinda like my monster creation. It works pretty good. With a qloader Ill be chillin. Might spin the tank the other way. I am gonna lighten it up alot if I get a qloader. With a remote line this would be alot tighter  and not take up so much room.

Edited by Jahgah_x

This show you how close I had to come to the button but it is still fully functional. I took alot of the plastic off the sroud with a soldering Iron. Why would I do that....... Because that plastic is ver hard and using a saw,knife,dremel would be time comsuming. But plastic melts very well and it let me shape it nicely. I got the exact size. If I had a pic of the other side I'd post it but it clips in flush. believe it or not its still very sturdy even though its only being held  by a small 1/2 a side of plastic but I think b/c the profeed and elbow clip in their so nice and tight that it keeps it very sturdy. Tippmann sure makes those shrouds thick. Cutting it would have taken 2 times as long.

dude, thats crazy