Phenom with leakage problem when it shoots |
Post Reply |
Author | ||
Samaggy
Member Joined: 10 September 2012 Location: Brazil Status: Offline Points: 4 |
Post Options
Thanks(0)
Posted: 10 September 2012 at 5:31pm |
|
Hello, first excuse my English, I have a Phenom and a small problem with this, when I give it 1 shot starts to leak air nonstop, I have to remove the cylinder HPA and then put back, but even doing this when I come back to shoot him back with the same problem, someone has a help?
I already checked all ORing and apparently all is OK. Edited by Samaggy - 10 September 2012 at 5:32pm |
||
Reb Cpl
Moderator Group Has to say "yes" to "are you a cop?" Joined: 10 June 2002 Location: United States Status: Offline Points: 14210 |
Post Options
Thanks(0)
|
|
It sounds like a bad seal somewhere inside the marker. With a piece as relatively new as the Phenom, I'd get a hold of Tippmann as soon as possible. Their customer service is second to none, and they'll take care of you quicker than you can imagine.
The first thing I suppose you COULD do is an old trick, put a few drops of oil into where your tank screws in and try to cycle the marker a few times. trying to get everything lubricated up inside. But I'd almost certainly get a hold of Tippmann for it. |
||
?
|
||
Samaggy
Member Joined: 10 September 2012 Location: Brazil Status: Offline Points: 4 |
Post Options
Thanks(0)
|
|
So the biggest problem is I was in Brazil where we have a representative from Tippmann here, and this is what else bothers because Paintball grows but does not have the support of international companies. Generally we try to solve the problems by ourselves.
|
||
TippmannEmployee1
Tippmann Tech Tippmann Sports Staff / Marker Guru Joined: 10 May 2010 Location: Fort Wayne Status: Offline Points: 158 |
Post Options
Thanks(0)
|
|
If it the marker holds pressure when the tank
is screwed in & then it leaks when fired, then I would think that the
o-ring that is on the inner diameter of the Flexvalve body that the spool rides on
is faulty. To fix it send it in to a Tippmann repair center. Or you can do it
yourself but it will require the whole Flexvalve to be disassembled. The o-ring is located on the front side or
the Flexvalve. Once the powertube &
all the internals are removed you will be able to see it. The part number for the o-ring is TA30050. |
||
Reb Cpl
Moderator Group Has to say "yes" to "are you a cop?" Joined: 10 June 2002 Location: United States Status: Offline Points: 14210 |
Post Options
Thanks(0)
|
|
You're useful to have around you know that? I'm not familiar enough with the breakdown of the flex-valve to have recommended it first- which is why I suggested contacting you guys ASAP. |
||
?
|
||
Samaggy
Member Joined: 10 September 2012 Location: Brazil Status: Offline Points: 4 |
Post Options
Thanks(0)
|
|
I'll try to service tomorrow night, and once you have a position I post here, if it was successful or not.
Thanks for now. Edited by Samaggy - 12 September 2012 at 9:44pm |
||
Samaggy
Member Joined: 10 September 2012 Location: Brazil Status: Offline Points: 4 |
Post Options
Thanks(0)
|
|
Hello again, well after replacing all the o'rings flexvalve continues with the same leak, did complete lubrication, the O-ring used were the Tippmann X7 Phenom Repair Kit Deluxe, and the first thing I changed was mentioned, and continued to leak, so I decided to replace the O-ring too well. Finally caught a Flexvalve a Phenom from a friend, I opened and checked flexvalve be all alike, without a scratch, mark or crack, guess I'll have to buy another Flexvalve, though she had only 5 months of use.
|
||
TippmannEmployee1
Tippmann Tech Tippmann Sports Staff / Marker Guru Joined: 10 May 2010 Location: Fort Wayne Status: Offline Points: 158 |
Post Options
Thanks(0)
|
|
Your Phenom has a 2 year warranty. Contact our service department for details on getting your marker serviced. Call 800 533-4831 & follow the prompts.
|
||
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |