Need Help takin my A-5 Apart

I need help with the same exact thing

Ok, this is what I would . Go to the web site and down load the schematic for your marker and print it out, the one in the manual is to small. get a nice area to work in , get a bowl to put the small parts in. Pull all the pins out first, some may be tight so push them out with an allen key. Next take the toombstone off , this is where the hose goes into the marker . Now pull the Trigger assembly off  have the safty "on" so it dost fall out and you lose it. Next loosen the 5 smaller and one larger allen screw, rotate the barrel away from you ( with the barrel in your left hand) . Remove the loosen screw the marker will now come apart. I would only go this far until you remember where everything goes. The ball latch is that orange thing at the front of the gun the mouth goes toward the barrel ">" when you tighten the screws back up dont over tighten them , hold onto the short end of the allen wrench ,this will kimit the amount of torque yoe can apply, Have Fun.

read your manual.

i find it really hard to take my internals out by taking out the 4 pushpins, if u do, loosen some of the bolts a bit so that there easier to come out.