rainx

hey all. well i was on another fourm earlier and there was a sugestion to coat the inside of your barrel with rainx, you know the stuff you coat your windshield with so the rain just slides rite off, well i tried it, what i did was used a 12 ga. shotgun swab and put the rainx on ti and ran it threw then you let it dry then run a dry swab through , it makes it pretty much like the cermaic barrell in that ball breaks will clean alot faster, its a cheap way to do this to all barrels

i honestley have no clue, it seem to me that would be kinda hard to do but with the rainx its a liquid and you can do your winshield too, but i tried it this afternoon i cut a ball and squirted it down the barrel and shot and it helped alot

some people suggested oiling the barrel a while back and people all told him it was a bad idea.. the rain-x would dry tho so it might work. i'd just be worried about buildup or residue.

Just get a gun that doesn't chop or break paint. Problem solved. And this is a very old idea.

well w/e, i have only choped paint once but it never hurts to be prepared lol