trouble with a spider clone

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   you need to replace or oil your striker o-ring. this is the o-ring on the hammer and in most spyders it is red but on clones its usualy the same color as the others. It can be if its the same as the others you can just use one of your spare o-rings that come with the gun or there should be a spare red one if it is red. just remember to put a drop of oil on it before reinstalling.
I recomend oiling the o-ring before replacing it because this will probly do it. As normal maintnance you should completely clean your bolt and hammer and re-oil the o-rings every 3-4 cases of paint.
If you dont know how to get to the hammer it just put your thumb on the velocity adjuster to prevent it from shooting out and pull the pin out of the side of the marker then carefuly allow the spring to come out. now just pull the bolt out and underneath it the hammer will be attached. when reasembling make sur the open en of the hammer faces the back.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
pbponcho Members Profile Send Private Message Find Members Posts Add to Buddy List Member Joined: 22 April 2006 Location: United States Status: Offline Points: 15	Post Options Post Reply Quote pbponcho Report Post Thanks(0) Quote Reply Topic: trouble with a spider clone Posted: 22 April 2006 at 8:11pm
	you need to replace or oil your striker o-ring. this is the o-ring on the hammer and in most spyders it is red but on clones its usualy the same color as the others. It can be if its the same as the others you can just use one of your spare o-rings that come with the gun or there should be a spare red one if it is red. just remember to put a drop of oil on it before reinstalling. I recomend oiling the o-ring before replacing it because this will probly do it. As normal maintnance you should completely clean your bolt and hammer and re-oil the o-rings every 3-4 cases of paint. If you dont know how to get to the hammer it just put your thumb on the velocity adjuster to prevent it from shooting out and pull the pin out of the side of the marker then carefuly allow the spring to come out. now just pull the bolt out and underneath it the hammer will be attached. when reasembling make sur the open en of the hammer faces the back.

kinnielson Members Profile Send Private Message Find Members Posts Add to Buddy List Member Guested - Selling Joined: 10 April 2006 Location: United States Status: Offline Points: 194	Post Options Post Reply Quote kinnielson Report Post Thanks(0) Quote Reply Posted: 22 April 2006 at 2:44pm
	i have an old Targa its a silver spyder clone with a vertical tank adapter and right now it is a pump,,, whenever you cock it and shoot the bolt goes forward and rattles only shooting one ball and you have to recock it EVERY TIME ,,, if anyone knows how to fix it ,, has any ideas or knows where i can buy Targa parts or spyder clone parts then please post!!
	"when you see a man on top of a mountain,, you know he didn't fall there" Cael Sanderson