COMPRESSED AIR WITH EBOLT
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Upgrades and Customizing
Forum Description: Trick it out!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=100197
Printed Date: 07 March 2026 at 2:38pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: COMPRESSED AIR WITH EBOLT
Posted By: airballer12
Subject: COMPRESSED AIR WITH EBOLT
Date Posted: 01 June 2004 at 4:55pm
|
ok, if u look at the comp-air low pressure system for the 98c, u will see that there is a rear cocking system part that goes on it. well after i installed the ebolt on my gun, theres a round knob on the back of my gun where that rear cocking system goes. so i dont get how u install the comp air low pressure system with the bolt. an anyone clarify plz? also, is it absolutely necessary to get that comp air low pressure system installed? or can u just screw on a nitro tank? ino that is pretty newb. can i also get some recommendations for a tank with a link plz. ------------- me and my friends have won 1st in 3 out of 3 5 man airball tournaments in the rookie division, woot! Front Playa- Team Confuzion my tippy: 98c w/ all american barrel, ebolt, egg 2 hopper |
Replies:
Posted By: Super NEWB
Date Posted: 01 June 2004 at 5:14pm
|
you can just plug it in and play you don't need the comp air system, i don't know about the ebolt because i have an a5 i like the cossfire 68/4500 nitro tanks http://www.pbreview.com/products/reviews/250/ - http://www.pbreview.com/products/reviews/250/ ------------- 
Angel guys get all the girls Steve Zissou: I'm going to find it and I'm going to destroy it. Possibly with dynamite. |
Posted By: korvecdal815
Date Posted: 01 June 2004 at 6:44pm
 send it to the proshop they will do it 4 u without u getting any problems
|
Posted By: cannonfodder
Date Posted: 01 June 2004 at 6:55pm
First off you don't need to use the lp system to use compressed air in your marker. Just get an air tank with an out put pressure pre set at 800 psi or more and screw it in. As far as the lp + ebolt go, just leave out the rear cocking pieces. That means the hammer, drive spring, rear plug etc are not used. You will end up just using the valve, the vertical adaptor and the air chamber. Kinda harsh that you have to buy the complete then not use half of it  . BTW I have both these systems on my marker and they work very good togethet
|