2nd time posting this....
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Upgrades and Customizing
Forum Description: Trick it out!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=104411
Printed Date: 30 April 2026 at 3:10pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: 2nd time posting this....
Posted By: D-ballzz
Subject: 2nd time posting this....
Date Posted: 30 June 2004 at 6:00pm
|
this is the 2nd time im posting this because. no one even answered my question before. i have a stock 98c, and i have a bigshot barrel, im getting a X-core exbansion chamber soon, i know i need a 90 degree fitting, and a vertical adapter, but somone please tell me what size of steel braided hose i will need? im not good with measuring and guessing. please somone tell me. or will the stock one fit? ------------- life sucks, then u die ------------------- 98c 12oz,20oz 12" Lapco Bigshot polished internals, along with every other homemade mod you can think of soon- x-core chamber, and rocket cock 2 |
Replies:
Posted By: Tippman98
Date Posted: 30 June 2004 at 6:03pm
|
If you're getting a 90 degree fiting, then your probably getting macroline. Otherwise, you won't really need a 90 degree fitting for steel braided, though you could use one. Your stock steel braided hose will work fine, but the steel braided hose that comes with Tippmann's x-chamber kit is 6 inches from end to end. ------------- "Paintballers are like roses - watch out for the PRICKS." |
Posted By: easy123
Date Posted: 30 June 2004 at 6:04pm
| ^^ tres knowledgable |
Posted By: D-ballzz
Date Posted: 30 June 2004 at 8:53pm
|
? how would u connect the steel braided hose with out a 90 degree fitting?? you would have to use one. cuz on the x-core the hole is on the bottem, no on the side of the chamber ------------- life sucks, then u die ------------------- 98c 12oz,20oz 12" Lapco Bigshot polished internals, along with every other homemade mod you can think of soon- x-core chamber, and rocket cock 2 |
Posted By: 98CustomPerson
Date Posted: 30 June 2004 at 11:44pm
| I just took off my hose from my gun and brought it to an automotive shop. Any hardware store will have it. Andd they do have 90* fittings for steel braided hoses. When you get there, tell someone I need a 90*fitting for this and they'll get it for you. |
Posted By: Paintball Panda
Date Posted: 30 June 2004 at 11:57pm
|
I dont Advise you "Direclty" screw in your hose to the Expansion Chamber.. Big NO NO! The 90* fitting helps so that your Steel braided hose doesn't get jamed up in there.... you may wanna just keep your current hose then see if you need to Shorten the length... |
Posted By: madpaintballer
Date Posted: 01 July 2004 at 12:07am
|
I'd just get the package, the GTA expansion chamber is only a 4 stage but it matches the contour of the foregrip. ------------- "Killing is my business...and business is good." |
Posted By: 636andy636
Date Posted: 01 July 2004 at 2:10am
then you bump it up not make a nother post bat signal |
D-ballzz wrote:Posted By: LevityNYC
Date Posted: 01 July 2004 at 8:40am
|
goto http://www.countypaintball.com - www.countypaintball.com on the left side of of the page there is a link to a hose chart ------------- Setup a-5, LPK, Macroline, 14 Lapco Bigshot, Dead on Drop, Palmers Stab, double trig, 68CI Crossfire 4500 Backup: 98C, GTA Expansion chamber, Fullboar Rear Cocking, 12oz Co2, 32 Ice Cold Barrel |