Print Page | Close Window

For all you with E-Blades 27bps

Printed From: Tippmann Paintball
Category: Tippmann Paintball
Forum Name: Paintball Ideas / News From Tippmann
Forum Description: Got a new idea or a way to improve something?
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=110741
Printed Date: 17 June 2024 at 11:12am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: For all you with E-Blades 27bps
Posted By: Mike Barch
Subject: For all you with E-Blades 27bps
Date Posted: 16 August 2004 at 11:31am
I have my cocker set at 27 cps. I hear a lot that factory fast is the best. Thats wrong. Here is how to set up your gun for maximum speed, although without the parts I have you cant set it to 27.

cdel - this is the most important setting, and it is not set correctly on factory fast. Rasing the cdel smooths out firing and gives less kick, therefore you can run a higher lpr, and lower tirgger filters, giving you more speed.

Start at factory fast with your gun set up, and shoot over a chrono, rasing your cdel. As you rasie your cdel, your velocity will raise as well. keep rasing the cdel until your velocity doesnt go any higher. At this point stop, or stop if your cdel is past 7 or 8.

Lpr - For maximum cycle rate your lpr must be high. Turn up the lpr high, like 70-85 psi. Dont go over 90 psi or the solenoid might blow.

Coff - The eye does not override the off setting, and this is where you can gain some speed. Keep turning down the coff while firing until you see drop off. Make sure your shooting fast and no drop off occurs.

Trigger filters - I have mine very low, at 2. By rasing your cdel you are able to lower the filters a ton.

There is also another theory im working on that would allow a coff time extremly low, at about 5 or 6. It has to do with the time it takes for the hamer to open the valve and the air to travel though the bolt. In theory the bolt could still be closing as the hammer is hitting the valve, so you can subtract that time. However it would almost be open bolt at this point.

Well, hope I helped some people. I can set up a stock cocker to rip with no bunce, and you dont have to have the trigger very stiff like most people think. Very Happy



-------------



Replies:
Posted By: lazyeyepancho8
Date Posted: 16 August 2004 at 2:25pm
you are crazy smart man

-------------
(Don't sell. Don't advertise. In fact, it's prolly best if you don't post at all.)


Posted By: sinisterNorth
Date Posted: 16 August 2004 at 2:33pm
Wow! That is pretty spiffin. Great job explaining and very thorough, I'll will have to see about trying that at my local shop since I know the guy pretty well.

-------------
Pumpker'd; (V.) When a pump player runs up and shoots you at point blank range because you thought 20bps made you good.


Posted By: thecorpseman
Date Posted: 16 August 2004 at 2:46pm
Can you PULL 27cps?

-------------
FAPM- Forumers against PopeMobile.


Posted By: Gewwy
Date Posted: 16 August 2004 at 11:49pm

Originally posted by thecorpseman thecorpseman wrote:

Can you PULL 27cps?

can my trigger bounce 27bps?



-------------

E-Tek Ego




Posted By: Dire Wolf
Date Posted: 17 August 2004 at 1:49pm
Bounce, no problems, pull.....pfffftttttttt.


-------------
Tippman A-5 "Dead On"
Army green reciever
- 12" Lapco Bigshot/ Flatline
- Palmer Male Stabilizer
- Dead On dropforward
- Dead On front grip
- E-grip
-Crossfire 88/4500 Stubby.


Posted By: MetallicaESPa5
Date Posted: 17 August 2004 at 9:13pm

Originally posted by thecorpseman thecorpseman wrote:

Can you PULL 27cps?

yeah right.



-------------



Posted By: Bomber Brigade
Date Posted: 17 August 2004 at 10:14pm
Originally posted by lazyeyepancho8 lazyeyepancho8 wrote:

you are crazy smart man
Dude its not that hard to figure out. If you have all those things its really easy. But good post anyway.

-------------


Posted By: You Wont See Me
Date Posted: 18 August 2004 at 9:43pm
Nice idea........

-------------
A-5
E-Grip
JCS Dual Trigger
DOP X-CORE 8 stage x-chamber
Lapco Bigshot 14" Beadblasted

Optional setup:
R/T
Dead on Blade trigger


Posted By: †Sniper†
Date Posted: 19 August 2004 at 10:29am
big difference between 27 Cps and 27 Bps


Posted By: WGP guy
Date Posted: 19 August 2004 at 6:18pm

Originally posted by †Sniper† †Sniper† wrote:

big difference between 27 Cps and 27 Bps

is it cycles per second and balls per second? does cycles mean without paint?



Posted By: jeep 98 custom
Date Posted: 19 August 2004 at 10:14pm
Originally posted by WGP guy WGP guy wrote:

Originally posted by †Sniper† †Sniper† wrote:

big difference between 27 Cps and 27 Bps

is it cycles per second and balls per second? does cycles mean without paint?



Yup, that's exactally right.

And with and without paint makes a big difference, espically with cockers, they can run a lot different once you put paint in them providing back pressure.


-------------
"Yes there are two path you can go back, but in the long run, there's still time to change the road you're on"





Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net