dremmeling(autococker)
Printed From: Tippmann Paintball
Category: Tippmann Paintball
Forum Name: New Player Forum
Forum Description: New to the sport? Get Professional Advice Here!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=113904
Printed Date: 08 December 2025 at 9:30am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: dremmeling(autococker)
Posted By: mirage500
Subject: dremmeling(autococker)
Date Posted: 19 September 2004 at 4:54pm
| what size grain or what size drill bit do i need to sand down the lug on the hammer, so i can work with the eblade properly |
Replies:
Posted By: Enos Shenk
Date Posted: 19 September 2004 at 5:01pm
|
Sand it down? Uhm, why? The whole point of the hammer lug is that it screws up or down from the hammer. ------------- 
|
Posted By: merc
Date Posted: 19 September 2004 at 5:49pm
|
look on the top theres a goofy hole...stick a 1/8" allen wrench down there left is up right is down ------------- saving the world, one warship at a time. |
Posted By: mirage500
Date Posted: 19 September 2004 at 6:13pm
|
.. bahh no really. |
Posted By: and10217
Date Posted: 19 September 2004 at 7:21pm
|
What kind of cocker is this coming out of. What i know is that 2k3+ WGP cockers all have flat lugs which will work with an eblade ------------- http://tippmann.com/players/forum/wwf77a/forum_posts.asp?TID=126701&PN=3 - Oh yes i did. |
Posted By: cockerkilla99
Date Posted: 19 September 2004 at 7:30pm
|
yes, you need a flat lug to work the e-blade properly. and just like bunkerking said ^ if its 2k3 or newer the lugs are pre flat. just take the sander on the dremmel kit and sand her down until u see no curves and then ur good to go, dont be afraid to mess anything up man, u cant really F up a hammer lug unless u r a complete moron and dremmel it until theres no lug left. ------------- 
|