New Designz Angled ASA
Printed From: Tippmann Paintball
Category: Tippmann Paintball
Forum Name: New Player Forum
Forum Description: New to the sport? Get Professional Advice Here!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=114127
Printed Date: 21 April 2026 at 7:31pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: New Designz Angled ASA
Posted By: Savior_six
Subject: New Designz Angled ASA
Date Posted: 22 September 2004 at 9:37am
http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=-qnR6ckg87TR44hxaJURQcPp8oQUIGaPi9w=?ProductID=vIysFAY7AD0AAAD5nA9JBmGW - New Designz Angled ASA
Hey, I wanted to get one of these for my Rat Jr. but dont know if it will fit. My gun has a small hole tapped under the adapter, and actvil.com said that I need a HFV or AHFV. Will it fit? And what's an HFV and AHFV? Thanks.
-------------
Team Salem, Kuwait 08
|
Replies:
Posted By: procarb11
Date Posted: 22 September 2004 at 10:16am
i have the angled asa on my strange imp. so i know exactly what screw you are talking about. The the hfv and ahfv are alteratives for the LPR, if you already have an LPR (which i did) i just bought the angled asa, however i had a problem removing that little screw and i stripped it out, so just used a dremmil and ground the screw flush with the body, and the angled asa went on fine. if you dont have an LPR mounted off the front of you volume cap, or dont plan on getting one, i would go with the hfv, but i would recommend an LPR, i have the SP mini one and it works great. to get additional info go to here... http://www.impulseownersgroup.com - Impulse owners group hope this helps...heres a pic of my marker with the angled asa on www.hometown.aol.com/p8ntballah213 - imp
-------------
Dust Black/Red DM5, Ultralite Frame, Ultralite Barrel, Orange Bolt Kit, Virtue Laser Eyes
|
Posted By: Savior_six
Date Posted: 22 September 2004 at 10:24am
Hey, thanks for the Help. I have an ND LPR mounted directly under the barrel. I'm not sure if that would be the volume cap or not. I can use a dremmel and grind down mine too, so that would work then?
-------------
Team Salem, Kuwait 08
|
Posted By: procarb11
Date Posted: 22 September 2004 at 10:48am
ok so u already have the lpr,(the ndz lpr has the high flow valve cap built onto the back of it) so you can just buy the angled asa, you dont have to grind down the screw, you can remove it, but i stripped it out so i just ground it down and it works great, im just not sure if it will perform as well with the screw out, i wouldnt take any chances and i would just grind it down b/c i know that works. good luck
-------------
Dust Black/Red DM5, Ultralite Frame, Ultralite Barrel, Orange Bolt Kit, Virtue Laser Eyes
|
|