Ebolt High pressure
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Upgrades and Customizing
Forum Description: Trick it out!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=114376
Printed Date: 29 April 2026 at 9:05pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Ebolt High pressure
Posted By: TankDude
Subject: Ebolt High pressure
Date Posted: 25 September 2004 at 6:35pm
|
a Ebolt 98 still needs high pressure right? ------------- Tankdude |
Replies:
Posted By: Squirrel Master
Date Posted: 25 September 2004 at 8:52pm
|
I fire mine with an anti-syphoned co2 tank and it runs fine..... ------------- ROCK IS DEAD!!! Long Live Paper and Scissors |
Posted By: rmorey
Date Posted: 25 September 2004 at 9:53pm
|
No, the e-bolt does not *need* high pressure. Actually the e-bolt only needs about 80 psi to work. That's what the low pressure regulator does - feeds e-bolt solenoid valve / ram. The gun valve itself is what requires more pressure. You can run the e-bolt with standard 850 psi (co2 or hpa), or you can add the low pressure kit and regulate the co2 or hpa down to about 350 psi. Short answer... e-bolt -> high pressure or low pressure w/ lp kit. ------------- You are never beaten until you admit it. - G. Patton |
Posted By: TankDude
Date Posted: 25 September 2004 at 11:46pm
|
would i be able to just throw on a low pressure reg and it would be more consistant w/o the lp kit? so just a reg? ------------- Tankdude |
Posted By: TankDude
Date Posted: 25 September 2004 at 11:47pm
|
aka is the lp kit absolutly required because i see pics of 98's with an ebolt and they have a low pressure reg on it without the lp kit. ------------- Tankdude |
Posted By: jeep 98 custom
Date Posted: 26 September 2004 at 1:05am
|
You don't need the LP kit. With the E-Bolt you can run at a much lower pressure anyways, the LP kit isn't worth it.
------------- "Yes there are two path you can go back, but in the long run, there's still time to change the road you're on" 
|
Posted By: TankDude
Date Posted: 26 September 2004 at 1:55pm
|
neato, thanks guys ------------- Tankdude |
Posted By: TankDude
Date Posted: 26 September 2004 at 2:07pm
|
Whats the ebolt capped at for semi? ------------- Tankdude |
Posted By: Bigomondis104
Date Posted: 26 September 2004 at 2:33pm
|
i have a LP kit on my tippmann as along with an e-bolt and it works so smoothly. ------------- 98 custom e-bolt low pressure kit dye drop forward 68ci 3000psi glass fiber tank halo b 10" custom products barrel double finger trigger vertical feed |
Posted By: Squirrel Master
Date Posted: 26 September 2004 at 5:28pm
|
GTA e-bolt (mine) is capped around 13-14 bps.....bsi (so I hear) can go up to 30 (but a Tippmann can only cycle around 18-20 if you want the maximum feed rate though, you'll want nitro.....other wise the front bolt will only open up fully every other shot when the ROF is set all the way up.......right now I have mine shooting just around 10bps.... ------------- ROCK IS DEAD!!! Long Live Paper and Scissors |
TankDude wrote:Posted By: TankDude
Date Posted: 26 September 2004 at 8:34pm
|
yeah i was thinkin, E98 with a low end reg would work good. plus comp air ------------- Tankdude |