Newest Trigger Mods
Printed From: Tippmann Paintball
Category: Tippmann Paintball
Forum Name: Marker Gallery
Forum Description: Show us your guns!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=115582
Printed Date: 28 June 2025 at 8:18am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Newest Trigger Mods
Posted By: SnakeEyes
Subject: Newest Trigger Mods
Date Posted: 09 October 2004 at 10:12pm
|
So, I got bored yet again and decided to make a 3 way adjustable trigger for my Model 98Custom. And here it is, it's adjustable in pre, over and side travel. So I can make the activation point of the trigger where ever I want it front to back, as well as control the side to side slop.
Works pretty well so far, but I haven't tried it gased up yet, but that shouldn't change anything considering the tigger catches and releases fine. SO, enough talk, here's the pictures. 
Word. ------------- Which falls faster, a lead ball or your IQ after reading some of these posts? http://www.pennstatepaintball.com" rel="nofollow - PSU Paintball |
Replies:
Posted By: evil-NYX
Date Posted: 09 October 2004 at 10:15pm
|
werd is right.........so complicated, but nice GJ! ------------- • http://www.pbnation.com/showthread.php?s=&threadid=797191 - PBN Feedback |
Posted By: boomstick
Date Posted: 09 October 2004 at 10:17pm
|
The trigger itself looks heavy.
------------- YONK~!~ |
Posted By: MuRdoc18
Date Posted: 09 October 2004 at 10:21pm
|
Nice slop adjustment ------------- 
Member of Forumer Against Most Forumers. |
Posted By: team policia
Date Posted: 09 October 2004 at 10:28pm
|
very good ------------- TEAM POLICIA FOREVER!! "my bad dawg"-ultimate apology |
Posted By: SnakeEyes
Date Posted: 09 October 2004 at 10:35pm
Boomstick, this is my test trigger that I abuse the crap out of doing mods to. Gimme a freakin break, I havn't seen you do anything interesting.  ------------- Which falls faster, a lead ball or your IQ after reading some of these posts? http://www.pennstatepaintball.com" rel="nofollow - PSU Paintball |
Posted By: Rbmllr412
Date Posted: 09 October 2004 at 11:55pm
|
Nice job! I love when people take the risk of doing home mods... ------------- SP Nerve, Max-flo 68/45, Halo B w/ V35 victory board, and RIP drive--All black |
Posted By: TippyManic32
Date Posted: 10 October 2004 at 12:21am
| It looks so complicated, but cool none-the-less |
Posted By: ziggymarley
Date Posted: 10 October 2004 at 12:31am
|
good job snake, hows the other m98 going? razor back...heheh
thanks for the pics too, gives us all ideas on how to do our own trigger mods. ziggy ------------- "Real markers have gills." "son of a <KRL>." |
Posted By: WebHalex
Date Posted: 10 October 2004 at 12:33am
| pretty interesting |
Posted By: MariosRampage
Date Posted: 10 October 2004 at 12:42am
Lol umm whats complicated about it?? But nice work, I've been looking for a easy way to fix slop and not have to buy a new drill bit  ------------- http://www.model98.net/phpbb/viewtopic.php?t=4856 |
Posted By: SnakeEyes
Date Posted: 10 October 2004 at 12:44am
|
Yeah, as for the latest M98C, I've been really busy and this is the first time since the beginning of the summer that I have had time to sit down and work on things.
Oh well. Yeah, I figured this would be something that people would be interested in, so I did it up and posted it. ------------- Which falls faster, a lead ball or your IQ after reading some of these posts? http://www.pennstatepaintball.com" rel="nofollow - PSU Paintball |
Posted By: Ashran
Date Posted: 10 October 2004 at 11:21am
|
How does that let you fire at any point, Obviously a very nice trigger, but shouldn't it always fire at the same point?
------------- 2k4 Viking SCM, MM JMJ roller trigger WAS 1.6 WAS eyes, WAS switch Dye Minidrop CP on/off |
Posted By: SnakeEyes
Date Posted: 10 October 2004 at 11:55am
|
Well, I can now adjust the trigger to start and stop anywhere I want, so indirectly it allows me the choice of where it fires if I change the sear tripping point. Which I am thinking about adding set screw to as well for making activation and trigger pull adjustments to. ------------- Which falls faster, a lead ball or your IQ after reading some of these posts? http://www.pennstatepaintball.com" rel="nofollow - PSU Paintball |
Posted By: boomstick
Date Posted: 10 October 2004 at 12:07pm
Go back to the rock you came out from under. I have done plenty of interesting things to my gun and about to do more. I was just saying the trigger looked heavy. ------------- YONK~!~ |
SnakeEyes wrote:Posted By: SnakeEyes
Date Posted: 10 October 2004 at 12:12pm
|
I was joking man, chill. Damn you get your panties in a twist quickly. ------------- Which falls faster, a lead ball or your IQ after reading some of these posts? http://www.pennstatepaintball.com" rel="nofollow - PSU Paintball |
Posted By: boomstick
Date Posted: 10 October 2004 at 12:13pm
and your point is? ------------- YONK~!~ |
Posted By: BARREL BREAK
Date Posted: 10 October 2004 at 12:15pm
| nice! |
Posted By: pballa j.r.
Date Posted: 10 October 2004 at 1:17pm
Dats how we roll down here in da dirty south! ------------- 
|
Posted By: MetallicaESPa5
Date Posted: 10 October 2004 at 4:32pm
|
looks good ------------- 
|
Posted By: SnakeEyes
Date Posted: 10 October 2004 at 4:59pm
|
I think I may embed a stainless steel pivot block into the right receiver to make for a smoother trigger action and to keep the set screw from digging into the receiver aluminum and possibly gumming up the trigger.
But thanks for the input. ------------- Which falls faster, a lead ball or your IQ after reading some of these posts? http://www.pennstatepaintball.com" rel="nofollow - PSU Paintball |
Posted By: Roll Tide
Date Posted: 10 October 2004 at 7:04pm
|
That's cool. What tools did you use to make it? ------------- <Removed sig for violation of Clause 4 of the New Sig Rules> 
|
Posted By: A4*Jyim*
Date Posted: 10 October 2004 at 7:30pm
|
wow thats cool
------------- 
Team GodLike Only God Will Judge Us.... PEVS PAINTBALL ~*JYim*~ |
Posted By: SnakeEyes
Date Posted: 10 October 2004 at 9:57pm
I used a cordless drill with various bits, a jig saw for roughing out the trigger shape, Dremel for smoothing everything out and routing out the slider channel, and a 6-32 tap for putting in the set screws. I also used Loctite 242 (the blue stuff) for locking the setscrews in place and then oiled the whole deal up. ------------- Which falls faster, a lead ball or your IQ after reading some of these posts? http://www.pennstatepaintball.com" rel="nofollow - PSU Paintball |
Posted By: Ashran
Date Posted: 10 October 2004 at 11:56pm
|
You could drill and tap the part of the sear that touches the trigger, but it'd be hard to adjust... imaigne it though.
------------- 2k4 Viking SCM, MM JMJ roller trigger WAS 1.6 WAS eyes, WAS switch Dye Minidrop CP on/off |
Posted By: ziggymarley
Date Posted: 11 October 2004 at 11:36pm
thanks snake, i was just gonna ask you what sizes you used for the tap. Great mod again, I think i'm gonna make my own trigger now. I got some inspiration from your picts, and yes, you get the credit when i get around to doing it. :) ------------- "Real markers have gills." "son of a <KRL>." |
Posted By: SnakeEyes
Date Posted: 12 October 2004 at 12:06am
|
Just remember to use Loctite 222 or 242 (purple or blue) on the set screws or you could run the problem of the set screws walking themselves loose. It's pretty annoying when you get all your settings dialed in and then go shooting and screw everything up. ------------- Which falls faster, a lead ball or your IQ after reading some of these posts? http://www.pennstatepaintball.com" rel="nofollow - PSU Paintball |