top cocking 98c w/flatline shroud
Printed From: Tippmann Paintball
Category: Tippmann Paintball
Forum Name: Paintball Ideas / News From Tippmann
Forum Description: Got a new idea or a way to improve something?
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=116982
Printed Date: 08 July 2024 at 4:55pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: top cocking 98c w/flatline shroud
Posted By: Stiffler
Subject: top cocking 98c w/flatline shroud
Date Posted: 25 October 2004 at 1:22pm
|
ok so you first take and make the 98c a top cocking marker by drilling a rectangle into the top of the marker and then turning the rear bolt so it sticks out of the top. you then cut a plastic flatline shroud to the length of the 98c and then dremel a little to get the edges of it smooth and slideable. you then take the shroud and attach it to the top cocking bolt there fore giving you a top cocking 98c with the flatling shroud. you'd pull the shroud back to cock it and when it fired it would go forward then back again, resembling a pistol kinda.
------------- 
|
Replies:
Posted By: 98 nitro
Date Posted: 25 October 2004 at 2:08pm
| if u cut a hole in the top of the 98c wouldnt co2 leak or cum out? |
Posted By: triggerhappy1
Date Posted: 25 October 2004 at 4:34pm
|
co2 wouldnt leak, but just turning the bolt sideways would make your gun full auto like its out of gas. theres a little notch on the bottom of the bolt that catches the sear. when its turned on its side, it can not catch, therefore making a continuous cycle. ------------- 
|
Posted By: Enos Shenk
Date Posted: 25 October 2004 at 5:52pm
|
Not to mention the linkage arm hole.
------------- 
|
Posted By: Stiffler
Date Posted: 25 October 2004 at 6:19pm
|
thats right i forgot about that....you'd almost have to drill a different hole in top of the bolt instead wouldnt you? -------------
|
Posted By: evil_fingers
Date Posted: 25 October 2004 at 8:28pm
So Enos, why dont you create a top cocking rear bolt fer us when you get bored ------------- Do not steal....the government hates competition! 
|
Posted By: brihard
Date Posted: 25 October 2004 at 10:09pm
|
Easy enough to do- Just dremel another hole for the cocking handle perpendicular to the existing one, and make the slide notch in the top of the marker and the flatline shroud. It wouldn't be pretty, but it would work- and coupled with a custom flatline shroud (ideally metal), making a cocking handle like off an M16 would be doable for real... Worth consideration. At some point in the future I'll pick up another 98 just to frig with it. My dad's getting a dremel for his birthday. ;) ------------- "Abortion is not "choice" in America. It is forced and the democrats are behind it, with the goal of eugenics at its foundation." -FreeEnterprise, 21 April 2011. Yup, he actually said that. |
Posted By: SnakeEyes
Date Posted: 25 October 2004 at 10:09pm
Or why don't I post what I have already created?
Squids. And you cannot mill out the back bolt with just a Dremel. It's hardened cast iron. You'll end up burning out the motor or destroying more bits than it's worth. You need a good drill with sharp bits to drill holes in it. You can use a Dremel to light work on the bolt though. ------------- Which falls faster, a lead ball or your IQ after reading some of these posts? http://www.pennstatepaintball.com" rel="nofollow - PSU Paintball |
Posted By: brihard
Date Posted: 25 October 2004 at 10:37pm
|
Hey, good stuff- thanks! Anyone know if this has ever been adapted for a rear cocking handle? Imagine that with a car stock... Nice milsim basis there. ------------- "Abortion is not "choice" in America. It is forced and the democrats are behind it, with the goal of eugenics at its foundation." -FreeEnterprise, 21 April 2011. Yup, he actually said that. |
Posted By: *Stealth*
Date Posted: 26 October 2004 at 8:38am
Obviously was looking at the chelsea sig when he said this. ------------- |
98 nitro wrote:Posted By: Bounty
Date Posted: 26 October 2004 at 2:59pm
 I bet you he was
|
Posted By: roadrunner0535
Date Posted: 26 October 2004 at 3:07pm
|
umm...wouldn't the moving shroud kinda be distracting, hit u in the face, and give ur position away? ------------- 98c seclusion 14" dye ultralite rufus dawg 2x stick trigg remote full-auto mod http://roadrunnerpaintball.mypicgallery.com/mpg/Route.asp - My 98C 100% smart parts |
Posted By: Stiffler
Date Posted: 26 October 2004 at 3:10pm
see i think making the 98c a top-cocking marker would be the hardest part of the hole thing and if i messed up there i would definitly cry -------------
|
Posted By: SnakeEyes
Date Posted: 26 October 2004 at 4:16pm
I would be a bit more worried about the sound of shooting the gun giving my position away than a small piece of plastic bouncing back and forth. ------------- Which falls faster, a lead ball or your IQ after reading some of these posts? http://www.pennstatepaintball.com" rel="nofollow - PSU Paintball |
Posted By: Saint
Date Posted: 26 October 2004 at 4:28pm
|
Lol.. when you shoot.. you hit the guy, that makes that problem disappear! ------------- 
First to play, last to stay. MN Militia. SETUP Tippmann C98 12" All American - Opsgear M4 Foregrip - M4 Mag Kit - Solid Stock |
Posted By: evil_fingers
Date Posted: 26 October 2004 at 4:54pm
|
Well, jus to let everyone know, I did drop an email to the guys at Proteam and they said a "new" rear cocking bolt can be done but, its gonna take some serious modding on the body and some serious moolah to have it all done...professionally. ------------- Do not steal....the government hates competition!
|
Posted By: Stiffler
Date Posted: 26 October 2004 at 7:23pm
^^bummer, but the point is it can be done -------------
|
Posted By: 98 nitro
Date Posted: 27 October 2004 at 3:46pm
| that gun dosent look like a 98 custom |
Posted By: Stiffler
Date Posted: 27 October 2004 at 4:23pm
|
^^its pretty crazy looking but under all those cutom mods its a 98c -------------
|