Airgun Designs Warp Feed Loader
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Upgrades and Customizing
Forum Description: Trick it out!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=117946
Printed Date: 26 May 2024 at 9:30am Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Airgun Designs Warp Feed Loader
Posted By: Fast Splat
Subject: Airgun Designs Warp Feed Loader
Date Posted: 06 November 2004 at 10:58am
I was looking at this Warp Feed Loader http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=qb89SS4MmvU9EW-AWu_94SSq13fBvYGj2Mo=?ProductID=c0OsFAY7YvgAAAD3jj%2elA_2t - http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/S tore/en/-/USD/DisplayProductInformation-Start;sid=qb89SS4Mmv U9EW-AWu_94SSq13fBvYGj2Mo=?ProductID=c0OsFAY7YvgAAAD3jj%2elA _2t
but I have a couple of problems...
- It says it only works with a Revolution or Evo II hopper... Is this true?
- It says it only works with AGD Guns and that I have to purchase a Proteam Warp Feed instead... I don't understand this.
If someone could help with this problem it would be great.
Thanx.
|
Replies:
Posted By: Augusta98
Date Posted: 06 November 2004 at 1:23pm
I know that thew Warp Feed has to be fed by an agitating hopper like the revie or eggy but i think you can use any type of hopper except the Halo, it might over feed the warp feed. As far as what they mean by this only works on AGD guns, I don't understand that. AGD shared it's design with Pro Team so that AGD could go back to building guns primarily. I think that the AGD version might include a mounting breacket that only lets the Warp mount real close to the body of the gun, automags are very small, you might have to use the Pro Team version to get the right mounting bracket. I can't really tell by the picture but the bracket does look really small. You might want to contact AGD directly and see what they say, I have seen Warp Feeds mounted on a variety of guns, unsure if they were AGD or Pro Team models. Hope that helps.
Tad
------------- Captain TEAM HELP
Member-Team.tacticalmarkers.com
|
Posted By: MiKePuNk
Date Posted: 06 November 2004 at 1:44pm
a guy at my feild has a warp feed on a spyder
|
Posted By: Boydster
Date Posted: 06 November 2004 at 1:49pm
**This Warp Feed only works with AGD Guns, for all other guns you must purchase a Proteam Warp Feed**
Copied straight off that site. Doesn't seem confusing to me. Just get one from http://www.proteamdirect.com/warpfeedkits.html - here .
EDIT: The Pro-Team one is 80 bucks more. I hate Pro-Team. They make great products but they are the biggest rip off I've ever seen.
------------- Video: http://pbvids.gamesxposed.com/files1/RTP.1116548567.wmv - My Automag RT Pro
::: http://boydsters-pics.mypicgallery.com/ - My Gallery :::
|
Posted By: CougarBattalion
Date Posted: 06 November 2004 at 1:54pm
AGD makes a warpfeed adapter that only fits mags. Pro-team makes
an adapter that fits all guns. You can use any hopper you want on
it, agitated, forcefed, gravity...it doesn't matter. There is a
battery mod for the warp that will give it't feed rate about 8 bps
extra.
So, to answer your q's.
1. No
2. You have to buy the proteam warp so it will fit your gun.
|
Posted By: Boydster
Date Posted: 06 November 2004 at 2:00pm
/\What's the mod?
------------- Video: http://pbvids.gamesxposed.com/files1/RTP.1116548567.wmv - My Automag RT Pro
::: http://boydsters-pics.mypicgallery.com/ - My Gallery :::
|
Posted By: CougarBattalion
Date Posted: 06 November 2004 at 2:04pm
Boydster wrote:
/\What's the mod? |
higher volt battery. it gives the thing more juice.
|
Posted By: cadet_sergeant
Date Posted: 06 November 2004 at 4:44pm
CougarBattalion wrote:
Boydster wrote:
/\What's the mod? |
higher volt battery. it gives the thing more juice.
| actually you can buy a kit that does that, a mod i know about feeds a ball every time you pull the trigger, it'll cost about $13 and you can get all the parts from most hardwear/ electronic places.
|
Posted By: CougarBattalion
Date Posted: 06 November 2004 at 5:06pm
cadet_sergeant wrote:
CougarBattalion wrote:
Boydster wrote:
/\What's the mod? |
higher volt battery. it gives the thing more juice.
|
actually you can buy a kit that does that, a mod i know about feeds a
ball every time you pull the trigger, it'll cost about $13 and you can
get all the parts from most hardwear/ electronic places.
|
thats called intelli feed and only workd with intelli grips that fit mags.
|
Posted By: cadet_sergeant
Date Posted: 06 November 2004 at 5:10pm
CougarBattalion wrote:
cadet_sergeant wrote:
CougarBattalion wrote:
Boydster wrote:
/\What's the mod? |
higher volt battery. it gives the thing more juice.
| actually you can buy a kit that does that, a mod i know about feeds a ball every time you pull the trigger, it'll cost about $13 and you can get all the parts from most hardwear/ electronic places. |
thats called intelli feed and only workd with intelli grips that fit mags.
| tell my bosses impulse that. he did the same mod, it can be done to any marker, not just AMG's, all you have to do it have to so it will hit the sear or what ever, and then have the wire feed out of the grip to the warp.
|
Posted By: CougarBattalion
Date Posted: 06 November 2004 at 5:15pm
cadet_sergeant wrote:
CougarBattalion wrote:
cadet_sergeant wrote:
CougarBattalion wrote:
Boydster wrote:
/\What's
the mod? |
higher volt battery. it gives the thing more juice.
|
actually you can buy a kit that does that, a mod i know about feeds a
ball every time you pull the trigger, it'll cost about $13 and you can
get all the parts from most hardwear/ electronic places. |
thats called intelli feed and only workd with intelli grips that fit mags.
|
tell my bosses impulse that. he did the same mod, it can be done to any
marker, not just AMG's, all you have to do it have to so it will hit
the sear or what ever, and then have the wire feed out of the grip to
the warp.
|
I wasn't refering AMG's. Yes, you can do it with other
mechs. I was refering to Electro's. You would need a jumper
soldered on the board for it to work.
|
Posted By: Fast Splat
Date Posted: 06 November 2004 at 6:12pm
So long and short I can us any hopper that is electronic with the Warp Feed. I have a Quatom. But i am getting a Revy.
And I have to get a Protem Warp Feed to fit any other gun besides AGD. I have a 98 C so will the Proteam version work?
|
Posted By: Fast Splat
Date Posted: 06 November 2004 at 6:19pm
http://www.proteamdirect.com/warpfeed.html - http://www.proteamdirect.com/warpfeed.html
Okay... Would this one work. It says that it fits 99% of guns. I hope that means Tippmann 98 C's. And that i can swich it out between guns easily.
I trhink it should work.
|
Posted By: Boydster
Date Posted: 06 November 2004 at 6:34pm
Posted By: rmorey
Date Posted: 06 November 2004 at 11:05pm
Ok... a lot of bad information up here. Some of it was corrected.
The AGD warp feed will fit the 98c right out of the box, with one minor modification to the feed elbow (I put a picture of the sanding I did to the feed elbow). The Proteam Products has different tubing and brackets & stuff so it will fit a variety of guns. It also has a vibration sensor on the bracket, so it will better detect shots from your gun. If you plan in intelli-feeding this to an e-bolt, you're paying for a lot of stuff that will be wasted.
Below is my 98c w/ e-bolt and AGD warp feed (intelli-feed to the e-bolt). You didn't give your setup, but if you have an e-bolt, I say save a few bucks and get the AGD. I don't see why anyone would get a warp feed without an e-bolt (but that's just me).
------------- You are never beaten until you admit it.
- G. Patton
|
Posted By: Flarpy
Date Posted: 07 November 2004 at 1:01am
One last thing, i too have a 98c with a warp and when i bought it (it's an AGD model) i needed to find another screw which i had lying around my garage in order for the ASA to be able to attach to the gun. The warp bracket is a little thick so you will end up having to find a screw somewhere to fit it on.
Okay, i just reread what i said and lemme try saying it clearer. The 98c has two screws for the ASA, one short, one medium. When you put on the warp, the medium ASA screw will fit just right where the short one was, and you will need a longer screw to replace the medium sized one.
------------- Gun Setup:
Black and silver 98c
14" J&J Ceramic barrel
20oz co2
Warp feed
Gravity loader :(
|
Posted By: Fast Splat
Date Posted: 07 November 2004 at 10:29am
Thanx Guys.
I decided that this is just to much to go through and why do all of this. So i decided just for the money I would spend on that Warp Feed I could get a...
http://http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=Ga2uqFR7RA-ugxX1W5puAF7dvO0bdM95dz4=?ProductID=cv7AqArbcqYAAAD%2e0XnJYXkJ - Diablo Halo LED Front Man TSA Loader - Black Instead of the Warp Feed
If that link dosen't work than here...
http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=Ga2uqFR7RA-ugxX1W5puAF7dvO0bdM95dz4=?ProductID=cv7AqArbcqYAAAD%2e0XnJYXkJ - http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/S tore/en/-/USD/DisplayProductInformation-Start;sid=Ga2uqFR7RA -ugxX1W5puAF7dvO0bdM95dz4=?ProductID=cv7AqArbcqYAAAD%2e0XnJY XkJ
|
Posted By: P!NK panther
Date Posted: 07 November 2004 at 11:05am
how about just dont get a warp feed?
------------- http://www.theimagehosting.com">
|
Posted By: Fast Splat
Date Posted: 07 November 2004 at 11:26am
P!NK panther wrote:
how about just dont get a warp feed? |
Ya' That's what I said. I am just going to by a Diablo Halo LED Front Man TSA Hopper
|
Posted By: rmorey
Date Posted: 07 November 2004 at 6:29pm
Ok... that's a good idea. Now-a-days, the only real good reason to get a warp feed is to get that big "hopper target" off the top of your gun (I like mine, though)
------------- You are never beaten until you admit it.
- G. Patton
|
Posted By: JeffJensen
Date Posted: 08 November 2004 at 10:59am
would it be possible to put a warp feed on an A-5?
------------- http://jeffspbpix.mypicgallery.com/mpg/Route.asp - My Gun
|
Posted By: rmorey
Date Posted: 08 November 2004 at 11:47am
Well... anything's possible (you'd have to do a lot of cutting, etc...), but why would you want to? The warp feed was one of the first true "force feed" loading systems. The A-5 has one built in (the Cyclone Feed system).
------------- You are never beaten until you admit it.
- G. Patton
|
Posted By: CougarBattalion
Date Posted: 08 November 2004 at 3:16pm
rmorey wrote:
Ok... that's a good idea. Now-a-days, the only real good
reason to get a warp feed is to get that big "hopper target" off the
top of your gun (I like mine, though) |
Um...That's always been the idea of the warp.
|
Posted By: ItalianoGuy04
Date Posted: 08 November 2004 at 4:27pm
NOOO DON"T PUT A WARP FEED ON TEH A-5 BIG EASTE OF MONEY.. yes it can be modded, you'd have to use the 30 round hopper, cut a hole in it. however the cyclone can only load 15 balls pers second, regardless of the hopper, so why bother?
-------------
Supe'd up Spyda Victor, don't like it, don't care
|
Posted By: rmorey
Date Posted: 08 November 2004 at 4:37pm
CougarBattalion wrote:
rmorey wrote:
Ok... that's a good idea. Now-a-days, the only real good reason to get a warp feed is to get that big "hopper target" off the top of your gun (I like mine, though) |
Um...That's always been the idea of the warp.
|
I disagree... when the warp came out, there was no other "force feed" system out there. You still had to count on gravity to feed your paintballs. Then, the warp served two functions; remove the hopper from the top, and force your paintballs into your gun. Now there are other electronic hoppers that can be called "force feed" systems.
------------- You are never beaten until you admit it.
- G. Patton
|
|