Print Page | Close Window

Question about R/T...

Printed From: Tippmann Paintball
Category: Tippmann Paintball
Forum Name: New Player Forum
Forum Description: New to the sport? Get Professional Advice Here!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=123985
Printed Date: 17 June 2026 at 1:01pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: Question about R/T...
Posted By: Doctor Volcom
Subject: Question about R/T...
Date Posted: 18 January 2005 at 1:45am
Ok,I just got a R/T and played with it once and it
barley actually responds back.Is there some type of
finger work you gotta use or is it my double trigger,i
dunno.

-------------
Classic Timmy
CP Voluimzer
Bob Long Assasins Barrel
VL eVLution 2
Critical Trigger
Dye Stickyz
CCM Feedneck

Smart Parts Ion (Black)



Replies:
Posted By: Panda Man
Date Posted: 18 January 2005 at 9:24am
it most likely is your Air Valve.  Adjust the Valve screw... Turn it towards the barrel, just dont do to much or it will fall off...

Try that agian, and if that isn't working then Take "OFF" the Double Trigger then Re-Try it.


-------------


Posted By: Shrp Shooter
Date Posted: 18 January 2005 at 12:41pm
Its definately the Valve screw. What me and my buddies do (we all got tipps) is when we first got our r/t's we had to kind of chrono them. The valve screw regulates the amount of o2 getting to that piston which resets the trigger. What you need to do is with your hopper on (electro or stock no matter) find out how many balls per sec can you get without chopping. What you do is start with the valve screw completely in and gradually turn it until you find the rate of fire you are most comfortable with. It takes about 20 min or less, and helps your game out a lot. I set mine to about 5-6 bps. Don't need to be too trigger happy! Good luk

-------------
The path of the righteous man is beset on all sides by the iniquities of the selfish and the tyranny of evil men.
-Jules(Samuel L. Jacson), Pulp Fiction
Ezekiel 25:17


Posted By: A5 dude15
Date Posted: 18 January 2005 at 1:06pm
^^ its been said


Posted By: Justice
Date Posted: 18 January 2005 at 2:38pm

Start with the valve screw set all the way in, and with a full tank turn that screw 1/4 turn, then test fire. Dont push on the trigger hard. If you have a single trigger press the very bottom (ya get better "bounce") keep turning it 1/4 turn until the r/t starts bouncing. I only have mine out about 2 turns (LPK) but on C02 it was only about 1 full turn out.

Dont worry youll find the "sweet spot" it takes a lil bit to fine tune it.



-------------

-JUSTICE
http://www.myspace.com/outkastpaintball - Outkast Myspace


Posted By: VTpaintballer
Date Posted: 18 January 2005 at 7:02pm
ya it will take about 30 min till you get the sweet spot, i can't really tell you how to get it, but once you do you'll know it


Posted By: Menohl
Date Posted: 19 January 2005 at 2:41pm
umm i was looking at your sig...

Its Scars... not Scares, and its Tattoos not Tatoos...

-------------


Posted By: DoctaMarcos
Date Posted: 19 January 2005 at 3:00pm
i wish there was steps in knowing how to find the "sweet spot" cause i want to kno how to make it shoot really really fast

-------------
Black Vision Impulse
-12" Progressive Barrel
-Black Magnetic Trigger
-VL Revolution 2
-CenterFlag Nitrogen Tank
70Ci 4500 Psi
Carbon Fiber


Posted By: evil_fingers
Date Posted: 19 January 2005 at 4:53pm
It takes time and patience in locating the sweet spot....jus keep doing it till you find, I found mine in 15 minutes after installing it.

-------------
Do not steal....the government hates competition!


Posted By: DoctaMarcos
Date Posted: 19 January 2005 at 7:27pm
what did you do when you found it what did you do before it which way did you turn it



-------------
Black Vision Impulse
-12" Progressive Barrel
-Black Magnetic Trigger
-VL Revolution 2
-CenterFlag Nitrogen Tank
70Ci 4500 Psi
Carbon Fiber



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net