Print Page | Close Window

98 Flatline interfierences

Printed From: Tippmann Paintball
Category: Tippmann Paintball
Forum Name: New Player Forum
Forum Description: New to the sport? Get Professional Advice Here!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=126859
Printed Date: 23 February 2026 at 2:58am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: 98 Flatline interfierences
Posted By: *Dash123*
Subject: 98 Flatline interfierences
Date Posted: 20 February 2005 at 1:04am
a couple quetions for anyone who might know abou
flatline barrels.....

Q #1: Does the elivated barrel on the 98' flatline
model affect the hoppers loading speed?

Q #2:What if i want to install a sight rail on my 98' is
that going to be possible if i install the flatline barrel?

Q #3:does the flatline have any direct affect on the
balls accuracy or speed?

Q #4: Will the range/accuracy be affected if i decide
to use Nitro?

Q #4: Will there e any complications if i use an
e-trigger make the gun automatic or to shoot in
bursts?

Q #5: wil a regular barrell cleaner work alright if a bal
explodes in the chamber?







Replies:
Posted By: RoboCop
Date Posted: 20 February 2005 at 1:09am

1: no

2: yes but hopper may get in way

3: accuracy increases because of the further distance given by the flatline

4: no

5: no

6 (you should have a six instead in place of that five and a five in place of a four)     back to the question, yes



Posted By: *Dash123*
Date Posted: 20 February 2005 at 1:12am
so can i use an elbow to get it outta the way?

and how do i go abut installing a rail on the shroud?


Posted By: RoboCop
Date Posted: 20 February 2005 at 1:15am
the shroud has slits in the sides to fit a sight like i put my red dot sight on it. My Halo B is big compared to a regular hopper, so you might be ok.


Posted By: Mack
Date Posted: 20 February 2005 at 1:58am

Originally posted by *Dash123* *Dash123* wrote:

so can i use an elbow to get it outta the way?

and how do i go abut installing a rail on the shroud?

Just like robocop said above, there is a sight rail molded into the shroud.  Since the shroud is plastic though, you have to be careful not to overtighten anything attached to it.  My Daisy Max View red dot set just a little to far forward for my taste when I mounted it.  I had to angle the hopper a bit, so they wouldn't touch.  I didn't like that so I used a Dremel to extend the rails back about a quarter of an inch.



-------------


Posted By: juggalette_99
Date Posted: 20 February 2005 at 2:06am
i liek 2 eat eat aplles and bananas

-------------
i love icp psychopathic records im down 4 life im a juggalette n i dont give a **edited** wat any1 thinks


Posted By: triggerhappy1
Date Posted: 20 February 2005 at 12:13pm
Originally posted by *Dash123* *Dash123* wrote:

a couple quetions for anyone who might know abou
flatline barrels.....

Q #1: Does the elivated barrel on the 98' flatline
model affect the hoppers loading speed? no it has no affect on shooting speed, chops, or hopper speed.

Q #2:What if i want to install a sight rail on my 98' is
that going to be possible if i install the flatline barrel? all sight rails that will fit on the 98s original rail will fit on the flatline shroud. 

Q #3:does the flatline have any direct affect on the
balls accuracy or speed? you will notice it is not quite as accurate as a normal barrel because of the further away target, and all of the variables that affect flight. and its just as fast but it does sustain speed longer because less air resistance due to backspin.

Q #4: Will the range/accuracy be affected if i decide
to use Nitro? not at all. if anything, the better consistancy will cause range and accuracy to stay similar.

Q #4: Will there e any complications if i use an
e-trigger make the gun automatic or to shoot in
bursts? no. the barrel does not affect the max shooting speed or cause more barrel breaks at a faster speed. if your hopper cant keep up, you will get chops which will cause breaks in the barrel.

Q #5: wil a regular barrell cleaner work alright if a bal
explodes in the chamber? regular squeegees will not get all of the paint out of the barrel. it will leave behind some reminances of paint which may cause more breaks, or swerves. fluffy or swab squeegges are the best for it.






-------------



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net