problem with cracked line
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=126897
Printed Date: 23 December 2024 at 6:26am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: problem with cracked line
Posted By: fishman666
Subject: problem with cracked line
Date Posted: 20 February 2005 at 3:40pm
|
I have a problem with my 98c my gass line is loctited into the
valve and somehow one of the threads on the gass line that connects the valve to the gass line is cracked(CO2 leak!). I know I will proably have to order a new gass line and valve , but I was just wondering is there anything I can do to fix the problem . I have already tride loctiting it agian , but loctite does not properly dry outside of the threads and it is almost impossible to disconnect the gass line from the valve. If you guys have any suggestions it would be a great help. |
Replies:
Posted By: triggerhappy1
Date Posted: 20 February 2005 at 4:04pm
|
try some teflon tape instead. wrap more than 3 layers clockwise around the threads. that should give you a better seal, and stop it. ------------- 
|
Posted By: Juan Hernandez
Date Posted: 20 February 2005 at 4:29pm
|
i say u should just get a new gas line there really cheap about 3 bucks.well goodluck ------------- Juan Hernandez |
Posted By: cdacda13
Date Posted: 20 February 2005 at 9:42pm
| get a new line. it will be easier. i believe the stock SS on a tippy is 7 or 8 inches |
Posted By: fishman666
Date Posted: 22 February 2005 at 10:12pm
|
Wow do I feel stupid. There was no cracked line all of the lock
tye I had on before was just worn off. So I just replaced it with teflon tape . thanks for your help guys |