low pressure system installation
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=128983
Printed Date: 15 May 2025 at 8:47pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: low pressure system installation
Posted By: playah916
Subject: low pressure system installation
Date Posted: 20 March 2005 at 6:22pm
|
I bought the LPK and followed the manual when installing it but
didt see anywhere in the manual what to do with the A-5 low pressure feed gas line. It came in the kit but didt see any instruction on where to put it ....anyone know whats up? |
Replies:
Posted By: triggerhappy1
Date Posted: 20 March 2005 at 6:59pm
|
That part replaces the cyclone feeder line. Its that simple! ------------- 
|
Posted By: ac600ccer
Date Posted: 20 March 2005 at 8:05pm
|
yes thats it you will see the black tube is bigger in dia, to let more gas thru,since you are using low psi. just unscrew the old one off and put the new 1 on. ------------- my A-5 setup,sp freak kit,pro-seal powertube,E-grip,cp 45* drop,polished internals,GTA lpk,palmers fatty stab.crossfire 45/4500 ,dye rhino cover,jcs duel trigger |
Posted By: playah916
Date Posted: 20 March 2005 at 9:04pm
|
so just take off the part of the tube that conects above the grip
and leave it open? |
Posted By: FyreFly
Date Posted: 21 March 2005 at 3:28am
|
Huh?!?
If you have an RT, you need to contact Tippmann for a new hose for that. ------------- 
System X NME LE WGP Orracle Cocker Tippmann A-5 E-Grip & LPK Tippmann 98C Flatline & LPK |
Posted By: LordJovian
Date Posted: 21 March 2005 at 8:21am
|
The black tube with silver weird looking screws (banjo fittings) goes where the orignial Cyclone line is. Look at the side of your gun. See the black tube with black screws coming from the middle of the gun, leading to the black plastic tube where the manual feed is? That's the air supply line for the Cyclone. It doesn't use magic to operate, it uses air from the CVX valve via the little black tube and two banjo fittings. If you don't put the LPK Cyclone line on with the LPK installed, Mr. Cyclone doesn't turn and you're playing pump class. If you have an R/T, you'll see another longer line running from the same center screw running back to your trigger. If you have one, you have to call Tippmann and ask for a Low Pressure R/T Line. Otherwise, your R/T will also work like crap. I can't remember (sad 'cause I have one) you might be referring to a steel braided hose line? This is for your regulator if you didn't run custom macroline or anything. ------------- A-5 E-grip Chipley Custom Carbon Graphite 16" Evil Adapter(Spyder) 32 Deg New '03 XChamber Remote Line Gun Sling Sniper f/x Stock LPK 68/4500 HPA R-5 CP Reg JCS Duel Trigger |
Posted By: playah916
Date Posted: 21 March 2005 at 3:29pm
|
ok thx, i contacted tippmann and they are gona send me a line
for my RT. Thx again |
Posted By: VolcomDude1688
Date Posted: 03 April 2005 at 4:27pm
| Poo |