solenoid in egrip
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=129172
Printed Date: 15 May 2025 at 6:58am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: solenoid in egrip
Posted By: A5 dude15
Subject: solenoid in egrip
Date Posted: 23 March 2005 at 11:51am
| ok guys, one of the wires that connect the solenoid to the board broke off of the board but are still attached to the solenoid. so i was gonna get someone to sater it back on but then i found a break in the wire right when it comes out of the solenoid. so even if i did sater it back on, it wouldnt work. so now there is only a little bit of wire coming out of the solenoid, barely enough to grab it with needle nose prliers. but the other wire that comes out of the solenoid is fine. when i do manage to grab the broken wire with the needle noses, i cant pull it out anymore or nything like that. is there anyway to fix this, or will i have to buy a new solenoid, or will i even have to buy a new egrip? thanks guys. |
Replies:
Posted By: The Guy
Date Posted: 23 March 2005 at 1:49pm
|
try your best to solder it on, you can't screw it up worse than you
already have. You'll have to send in your e-grip to get a new solenoid. Call Tippmann first, soldering it yourself may void warranty. ------------- http://www.anomationanodizing.com - My Site 
|
Posted By: A5 dude15
Date Posted: 23 March 2005 at 3:41pm
|
i cant solder it because one of the wires are broken right when it comes out of the solenoid. it cant even reach the board. |
Posted By: A5 dude15
Date Posted: 23 March 2005 at 3:43pm
| so i guess ill have to call tippmann and send it in. |