stripped screw on a 98 custom
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=129239
Printed Date: 15 May 2025 at 7:09am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: stripped screw on a 98 custom
Posted By: warman
Subject: stripped screw on a 98 custom
Date Posted: 24 March 2005 at 12:31am
|
two of the bolts on my buddies 98 are stripped. They are both bolts needed to disasseble the gun. and i was wondering what the easiest way to remove them so they can be replaced. before my friend starts hitting his gun with a hammer... oh wait it's too late ------------- N is for nowledge |
Replies:
Posted By: The Guy
Date Posted: 24 March 2005 at 12:50am
|
well if its too late then I won't answer....... Craftsmen Screw-out, or cut a slot in the top with a dremel and use a flathead screwdriver. ------------- http://www.anomationanodizing.com - My Site 
|
Posted By: triggerhappy1
Date Posted: 24 March 2005 at 9:01am
|
You can get an extractor bit and take any stripped screw out. Or get JB Weld and a new allen wrench and bond the wrench in the whole and unscrew it when it sets. Or cut a notch in the head with a Dremel and unscrew it with a flat head screwdriver. ------------- 
|
Posted By: yankeeboystevel
Date Posted: 25 March 2005 at 9:23am
| I accidentally stripped the place where the two valve bolts go in. One isn't that bad. The other... whenever you put a screw in, it gets rocketed out. Any suggestions? |