Power Tube
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=129510
Printed Date: 15 May 2025 at 12:32pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Power Tube
Posted By: ztbisme
Subject: Power Tube
Date Posted: 27 March 2005 at 5:41pm
| My valve will not come out of the power tube. Anyone happen to have a guess of why? |
Replies:
Posted By: triggerhappy1
Date Posted: 27 March 2005 at 8:28pm
|
First make sure nothing is screwed into it, or there are no obstrucions blocking it. It probaly will not come out because some Loctite seeped up between it and the valve and hardened. You can either push really really hard through the front with a screwdriver, or run it under hot water then push (more practical wat). The hot water should loosen it up a little and get it freed up. Dont worry about getting any in your valve. It will shoot right out. Its usually not very easy to remove the valve from the PT anyway. ------------- 
|
Posted By: evil_fingers
Date Posted: 28 March 2005 at 2:58am
|
Take a pencil (eraser end) and slide it through front end of the power tube and push out the valve. ------------- Do not steal....the government hates competition! 
|
Posted By: Sentinelz
Date Posted: 29 March 2005 at 12:13am
|
I pulled mine right out but then again I am benching 300....ok ok 225. ------------- 
http://thedrunkenclam.zipa.com/vidclips/sexyparty.mpg - Sexy Party |
Posted By: bluemunky42
Date Posted: 29 March 2005 at 10:04am
|
ha. im benching 50 with struggle ------------- 
http://www.freewebs.com/hazedinsanity - http://www.freewebs.com/hazedinsanity |