expansion chamber leakage
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=130143
Printed Date: 11 January 2025 at 9:55am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: expansion chamber leakage
Posted By: animetill2
Subject: expansion chamber leakage
Date Posted: 04 April 2005 at 11:13am
|
I just bought the inline expansion chamber kit. After assembly, I screwed in my CO2 tank. Air immediatley began leaking from the area where I screwed the expansion chamber into the verticle adapter. I never had any problems before.
All the o-rings are in place, but I am missing the foregrip screw. I need help desperatley! |
Replies:
Posted By: triggerhappy1
Date Posted: 04 April 2005 at 1:23pm
|
You could try putting teflon tape on the expansion chamber threads if a new o-ring doesnt help. The foregrip screw has nothing to do with any leaks. Are you sure its leaking from there? ------------- 
|
Posted By: The Guy
Date Posted: 04 April 2005 at 3:18pm
|
is it screwed down tight enough?
------------- http://www.anomationanodizing.com - My Site 
|
Posted By: Shub
Date Posted: 04 April 2005 at 11:12pm
| The o-rings are there, but are they in good condition? Is there any debris in the vert. adaptor keeping you from screwing the expansion chamber in tightly? |
Posted By: whoknowswho
Date Posted: 06 April 2005 at 11:47am
| I would suggest using teflon tape on the threads and make sure you screw the expansion chamber in all the way. |