98C Looses Pressure When Barrel Is In
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=130578
Printed Date: 19 May 2025 at 3:05pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: 98C Looses Pressure When Barrel Is In
Posted By: eaglesin05
Subject: 98C Looses Pressure When Barrel Is In
Date Posted: 10 April 2005 at 1:02pm
|
Hi. I have a tippmann 98C with a 14" J&J ceramic. When I screw in
the barrel all the way in and try to shoot the gun just makes a 'click'
noise as if there was no air in the gun. When I unscrew the barrel more
then half way ther gun works normal and it works fine with the stock
barrel. Why is this happening and what can I do to fix it? Thanks ------------- Camo'd 98C Remote Polished internals Dbl trigger 14" J&J Ceramic Barrel Rocket Cock 2 Trigger Slop Mod 12V Revvy 03' Dye stikies R/T Drop Forward |
Replies:
Posted By: triggerhappy1
Date Posted: 10 April 2005 at 1:18pm
|
The problem is that your barrel is sticking out inside too much slowing down the bolt. Take apart your gun with your barrel on and see what is getting in the front bolt's way. If the barrel isnt loose when not screwed in all the way, you can keep it like that. You can also try replacing the rubber o-ring on the front bolt with a normal tank o-ring since it is a slightly small durometer, and less likely to catch.. ------------- 
|
Posted By: amazin asian
Date Posted: 10 April 2005 at 2:51pm
|
Yea you might of gotten a really small bore too, but thats unlikely I used a 14 jj and had no problems ------------- HAHAHA, i wipe |