cocking rod
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=130642
Printed Date: 15 May 2025 at 8:45pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: cocking rod
Posted By: ekeboo
Subject: cocking rod
Date Posted: 10 April 2005 at 11:26pm
|
ok so im trying to unscrew a cocking rod off my friends outkast but the rod just wont budge the little nut thing will unscrew but the rod stays in there. any ideas. he hasnt messed with it so i dont know -------------  
|
Replies:
Posted By: Liquid3
Date Posted: 11 April 2005 at 8:09am
| Check for small setscrews. There are usually a couple locking the adjustment points. If you are still having a problem take it to a shop. You will have to get it retimed anyway. |
Posted By: ekeboo
Date Posted: 11 April 2005 at 11:09am
|
i have tightend the poop out of the back one which is messing with the timeing i know but i know how to time a cocker decently. ill try it at again -------------
|
Posted By: The Guy
Date Posted: 11 April 2005 at 1:35pm
|
crank down the set screw in the back of the nut and use a wrench to
remove the rod. If that doesn't work, get ready to buy a new rod,
because you'll have to take the vicegrips to it.
------------- http://www.anomationanodizing.com - My Site 
|
Posted By: ekeboo
Date Posted: 11 April 2005 at 10:13pm
|
well is used a a table vise with a cloth. worked quite well got it out and timed it to my bbest of ability and going to give it back on wednesday, jeez i cant spell thank for the help guys. -------------
|
Posted By: Enos Shenk
Date Posted: 12 April 2005 at 12:06pm
|
Just for future info, the easiest way to do this is screw on 2 or 3
10-32 nuts, tighten them together as tight as you can, and use a wrench
on the closest nut to the body, so when it tries to unscrew off the
rod, it jams and will unscrew the rod from the hammer.
------------- 
|