Print Page | Close Window

RT System

Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=131717
Printed Date: 08 April 2026 at 3:29am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: RT System
Posted By: Project86
Subject: RT System
Date Posted: 25 April 2005 at 12:46pm
    When i turned the RT system to full power I shot a few rounds of before one of the velocity screws popped out and the second one was lose.  What do i do?  ( had guys at a paintball store install it) 

-------------
98c w/ Boomstick 14"
RT w/ Double finger trigger
Evoulution II Hopper
(The praying hands are you when you play against me!)



Replies:
Posted By: PB MISFIT
Date Posted: 25 April 2005 at 12:58pm
Ahh! Thats your Power-Tube! Screw those screws in tight (Not too tight, you might crack the plastic!)

Hopefully it didnt break when they popped off.


Posted By: Project86
Date Posted: 25 April 2005 at 12:59pm
what if it did?

-------------
98c w/ Boomstick 14"
RT w/ Double finger trigger
Evoulution II Hopper
(The praying hands are you when you play against me!)


Posted By: PB MISFIT
Date Posted: 25 April 2005 at 1:02pm
Then you'd have to call Tippmann, and have a replacement one sent to you. Most of the time they will send you one free of charge. Put the 2 screws in securely, and air it up. If it leaks, it might be broken.


Posted By: triggerhappy1
Date Posted: 25 April 2005 at 1:49pm

Another classic case of overtightened valve bolts. The guy who installed it overtighten these screws which stripped the threads on the valve body. Then he just placed them back in, and the force of the bolt knocked them out. You must get a new valve or valve body or you will have serious problems.

Buying two new screws wont solve anything, the threads that they go into are stripped not them. The valve body is aluminum and the screws are steel so these strip out very easily and frequently. You will need a new valve so call Tippmann and order one ($30).



-------------


Posted By: Project86
Date Posted: 25 April 2005 at 4:18pm

30$ thats a rip off, seriously.  I bet i can make the same body in china with the factory machines for 3 or less pennies.  I'm gonna go to the guy and ask for new install part thing for free or whatever after all he did the mistake not me.



-------------
98c w/ Boomstick 14"
RT w/ Double finger trigger
Evoulution II Hopper
(The praying hands are you when you play against me!)


Posted By: triggerhappy1
Date Posted: 25 April 2005 at 5:47pm

The warrenty will probaly cover it if you still have it. Its pretty easy to machine a new body but it must be precise and youd have to be a machinist. You could ask a machine shop to copy it for you which probaly wouldnt be much.

Or you can just buy a new valve body ($16) and transplant the valve parts. But it isnt very easy.



-------------



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net