Balls go 2 feet
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=132092
Printed Date: 27 April 2026 at 12:27pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Balls go 2 feet
Posted By: amazin asian
Subject: Balls go 2 feet
Date Posted: 30 April 2005 at 12:53pm
|
Ok i have a xstream nitro duck with an output of 850 or higher, i fire and it goes like 10 feet at the max and falls to the ground, whats the problem? to much pressure, to little? Co2 works fine but i seen my friend just use a preset of 800 and it works fine. ------------- HAHAHA, i wipe |
Replies:
Posted By: Darur
Date Posted: 30 April 2005 at 2:13pm
|
Need more info. Whats your gun? When did this start?
Have you modifed your gun in any way before this happened?
------------- Real Men play Tuba [IMG]http://img89.imageshack.us/img89/1859/newsmall6xz.jpg"> PH33R TEH 1337 Dwarf! http://www.tippmann.com/forum/wwf77a/log_off_user.asp" rel="nofollow - DONT CLICK ME!!1 |
Posted By: crazy_dave
Date Posted: 30 April 2005 at 2:33pm
|
are you POSOTIVE that you screw the tank in ALL the way....if
you have a tank cover you start to loose grip and you ASUME you screwed it in all the way ------------- Real guns have gills. |
Posted By: amazin asian
Date Posted: 30 April 2005 at 3:02pm
|
ok it is a 98c with marcoline and custom products on/off, polished internals and yes the tank is screwed in all the way and the marcoline is long enough and the velocity screw is not all the way in. ------------- HAHAHA, i wipe |
Posted By: The Guy
Date Posted: 30 April 2005 at 3:08pm
|
The Nitro Duck extreme reg is an adjustable tank regulator. You probly need to turn it up. *edit* are you using a chronograph to check velocity?? Turn your velocity screw until it is flush with the inside of your powertube. Gradually turn up the tank reg until you are shooting around 300 fps. Use the velocity screw to bring the reg down to target veloctiy. ------------- http://www.anomationanodizing.com - My Site 
|
Posted By: amazin asian
Date Posted: 30 April 2005 at 5:17pm
|
Yea the tank is giving out close to the max pressure 900, and the screw is far out already, obviously the velocity is too low. ------------- HAHAHA, i wipe |
Posted By: The Guy
Date Posted: 30 April 2005 at 10:45pm
|
if other tanks work fine, then the problem points to your tank. Are you sure you don't just have 900 PSI left in your tank?? ------------- http://www.anomationanodizing.com - My Site
|