e-grip troubles seems to freeze up
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=132225
Printed Date: 03 July 2024 at 3:41pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: e-grip troubles seems to freeze up
Posted By: a3aan
Subject: e-grip troubles seems to freeze up
Date Posted: 02 May 2005 at 5:08am
|
I have a custom pro e and when I shot at home
without co2 there was no problem whatsoever, but on the field it broke
down after the first 50 shots.
After I fired the e-grip for the first 50 times it didn't respond anymore. But if I shook the gun and I pushed the safety pin in a couple of times it did shoot 1 shot, or shoot randomly good or not. So... I opened her up and looked, but couldn't find anything! and it worked like normal. Then when I put it alltogether again: I could pull the trigger, but the shot never came! I exchanged the battery but it stil didn't shoot. I put on some gas today and it works fine the first couple of shots. After that the 'click' from the trigger dissapears and the bolt stays cocked. What can be the problem? 
|
Replies:
Posted By: The Guy
Date Posted: 02 May 2005 at 8:40am
|
Sorry, Tippmann doesn't update their site with new tech information,
and very few people on here own a Custom Pro. I don't think we will be
much help. Call Tippmann and ask fro help, and also request that the custom pro tech info be posted on the site. ------------- http://www.anomationanodizing.com - My Site 
|
Posted By: rockyboarder
Date Posted: 04 May 2005 at 9:02pm
|
yo buddy i can think of some things....maybe the seer isn't working correctly so just getta new one...maybe the bolt engraving to catch the seer is either too far back or forward....umm i don't own an a5 but i think those are some legit reasons ------------- the bigger you get the more people wanna see you fall. |
Posted By: The Guy
Date Posted: 04 May 2005 at 9:19pm
he has a pro-e, not an A-5. ------------- http://www.anomationanodizing.com - My Site
|
rockyboarder wrote:Posted By: Stormcharger
Date Posted: 05 May 2005 at 12:32pm
|
Battery, battery, battery. Just because it makes your tounge tingle doesn't mean that it has enough charge to operate the sear. |
Posted By: a3aan
Date Posted: 06 May 2005 at 12:05pm
It's not the battery. The strangest thing is: I used it the day after (after I resoldered the batery wires) and it worked ok! I sure hope i'm not having troubles again. Can it be the co2 or bad installation of the vertical adapter? |
Posted By: Clark Kent
Date Posted: 06 May 2005 at 4:22pm
|
Sounds like your gun is just freezing up...? Try shooting slower and see if that helps. |
Posted By: INV8ER
Date Posted: 06 May 2005 at 5:15pm
|
you may need to get an anti siphon tube for your tank, I have a Custom Pro E and an anti siphon tube and I have never had that problem. Make sure the magnet under your solenoid is sitting right .... ------------- 
|