air hose and fitting help???
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Upgrades and Customizing
Forum Description: Trick it out!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=133672
Printed Date: 03 March 2026 at 12:20am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: air hose and fitting help???
Posted By: CLos98C
Subject: air hose and fitting help???
Date Posted: 21 May 2005 at 1:52pm
|
ok i have a 98C on co2 with an 11" air hose on it with a shocktech fullsize dropforward. when i bought the hose and put it on i realized it was too long. i want to take off the 11" and get a 90 or 45 degree fitting adapter and i was wondering what size hose to get with one. i was thinking 6" or 7" but im not sure. any help? ------------- 
|
Replies:
Posted By: tigman250
Date Posted: 21 May 2005 at 8:49pm
|
are you talking a coil remote? '= feet " = inches i think you are confusing abbreviations if you're talking inches take your setup to your local shop and they should let you size one up. that way you don't need to buy 4 hoses to find the perfect match ------------- http://img76.imageshack.us/my.php?image=stickemup6of.jpg"> 
|
Posted By: You Wont See Me
Date Posted: 21 May 2005 at 9:04pm
|
He means the stainless steel hose. ------------- A-5 E-Grip JCS Dual Trigger DOP X-CORE 8 stage x-chamber Lapco Bigshot 14" Beadblasted Optional setup: R/T Dead on Blade trigger |
Posted By: [FI_Reigns]
Date Posted: 21 May 2005 at 9:23pm
|
Heyya! Just measure from the bottom of the drop forward and air source adaptor to the place where the hose goes into the obdy. Take it and add a half inch to an inch to be safe. Or, you could go to the local store and measure it out and purchase it there if you have a shop. That would actually be better. Good luck! ------------- Rawr... |
Posted By: crazy_dave
Date Posted: 21 May 2005 at 11:32pm
^^^your avatar seems to be on rewind   , wait...whats
was this post all about again? ------------- Real guns have gills. |
Posted By: hybrid-sniper
Date Posted: 21 May 2005 at 11:34pm
| You could do macroline. Then you could cut to length. |