Can’t Open Gun
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=135936
Printed Date: 27 July 2026 at 12:07pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Can’t Open Gun
Posted By: pb1m
Subject: Can’t Open Gun
Date Posted: 20 June 2005 at 7:36pm
| hey guys, recently i had an ergo reg put on my gun. The other day i tried to take the gun apart to oil it and i culdnt seem to be able to open the 2 plates. All of the nessecary(sp?) screws have been removed. Could it have to do with the reg that was installed? Any advice is appriciated. Thanks |
Replies:
Posted By: triggerhappy1
Date Posted: 20 June 2005 at 9:43pm
|
If its a 98 and there is a vertical adapter for the reg, that may cause a tigter fit. What you should do is get a very thin flathead screwdriver, and carefully pry the sides apart. Also make sure the cover on the cocking knob is off first. ------------- 
|
Posted By: holysmartone
Date Posted: 21 June 2005 at 12:14am
| Also make sure the velocity screw is all the way in or out, this can also cause problems opening it. |
Posted By: Bruce A. Frank
Date Posted: 21 June 2005 at 1:27am
|
Make sure your velocity screw in turned inward so that it clears the hole in the left half of the marker. |
pb1m wrote:Posted By: pb1m
Date Posted: 21 June 2005 at 6:33pm
thanks guys, it was the velocity screw. Wow i feel retarded
|
Posted By: meteora
Date Posted: 22 June 2005 at 3:21am
its happened to me before, see these little things just make us smarter :) ------------- http://imageshack.us"> 
GUN WHORE XTC |