can’t remove ny barrel
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=137428
Printed Date: 14 June 2025 at 1:35am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: can’t remove ny barrel
Posted By: attackpotatoe
Subject: can’t remove ny barrel
Date Posted: 08 July 2005 at 12:46am
are there some guns with nondetachable barrles or is my barrel just jammed in the body really hard  ------------- danger will robinson danger |
Replies:
Posted By: sscocker
Date Posted: 08 July 2005 at 12:52am
|
First! Tell us what gun and what barrel! now tell us have you ever been able to get it out! and Did u buy it like that! The Barrel is prolly crossthreaded into the gun! That ain't good if i'm right! ------------- 2005 Super Stock Autococker Dye Invision Freak Barrel Kit Egg 2 68/3000 HP |
Posted By: The Guy
Date Posted: 08 July 2005 at 4:47am
|
Well lets see. The SMG barrel requires a vice and a lot of force to
remove since its welded in place. Mag barrels can be tricky to remove
if you arn't familiar with the. Most old Tippmanns and tons of older guns used a lockign screw to hold the barrel in. so it really comes down to what gun you have. ------------- http://www.anomationanodizing.com - My Site 
|
Posted By: attackpotatoe
Date Posted: 08 July 2005 at 4:10pm
|
i have spyder and i was able to get it uot this morning when i had someone else grab the barrel ------------- danger will robinson danger |
Posted By: Pro_Carbine
Date Posted: 08 July 2005 at 8:53pm
|
Probably wrong threades and forced it in there or it hasnt been greased and been stuck. G00d Luck! ------------- 98c R/T Eggy w/ Z-Board Hpa Tank Double Trigger Drop Foward 12" Smart Parts Progresive Team Morelli Company "autococker with 40 inch hammerhead barrel mounted onto a flatline"-Lester98c LOL |
Posted By: The Guy
Date Posted: 08 July 2005 at 11:49pm
|
Put a little dab of lithium grease on the barrel o-ring. Check both the
barrel threads and the receiver threads and see if there was any
crossthreading.
------------- http://www.anomationanodizing.com - My Site
|
Posted By: hybrid-sniper
Date Posted: 10 July 2005 at 1:44am
|
What! I! Could not hear you! With all the! All that! !!! Yes! That's right! You rock my world! Keep on pimpin G-Unit! ! |
sscocker wrote: