Pro/Carbine Sear
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=137468
Printed Date: 14 June 2025 at 1:33am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Pro/Carbine Sear
Posted By: Snake6
Subject: Pro/Carbine Sear
Date Posted: 08 July 2005 at 3:24pm
|
I think the sear on my P/C is worn out, the gun cocks normal the first time, but when I fire it the thing makes that noise(yes you know the noise). I checked my sear, and noticed when the trigger was pulled the sear falls behind the trigger, instead of standing on top of it like it is supposed to. Is there any way to ghetto rig the sear to fix this without buying a new one? I have to play tomarrow, and the proshop near here doesnt have one in stock. ------------- 
|
Replies:
Posted By: The Guy
Date Posted: 08 July 2005 at 11:48pm
|
When you check your sear. Push forward on it, then see how it lines up. Your problem lies elsewhere. Check your rear bolt o-ring and clean out the slot on the top of the body. Make sure nothing is rubbing against the connecting rod. ------------- http://www.anomationanodizing.com - My Site 
|
Posted By: Enos Shenk
Date Posted: 09 July 2005 at 1:40am
|
Every blowback sear doesnt mesh with the trigger until the hammer is
exerting a forward force on it. Otherwise it would be ghetto full auto.
------------- 
|
Posted By: Snake6
Date Posted: 09 July 2005 at 6:03pm
|
Ok, I replaced the sear, and it still doesnt work, I also replaced all the O-Rings on the gun.... -------------
|
Posted By: The Guy
Date Posted: 09 July 2005 at 6:09pm
|
did you oil it or check if the cocking rod is binding??
------------- http://www.anomationanodizing.com - My Site
|
Posted By: Snake6
Date Posted: 09 July 2005 at 7:31pm
|
ja. I replaced the Rear bolt O-Ring again, and it seemed to fix it. But I dont know how that could have fixed it, the O-RIng I replaced was brand new.... Whatever it works now, I think. -------------
|