wdf and were the **edited** do i put this
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Upgrades and Customizing
Forum Description: Trick it out!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=137489
Printed Date: 24 July 2026 at 9:10am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: wdf and were the **edited** do i put this
Posted By: tippmann ruler
Subject: wdf and were the **edited** do i put this
Date Posted: 08 July 2005 at 10:39pm
| i wus alway wondering, i have a 98c and i want a guage so i can see how much co2 i have left but were do i install this on my gun and do i have to have a x-chamber to put one on help me hurr |
Replies:
Posted By: Mehs
Date Posted: 08 July 2005 at 10:49pm
|
Don't bother with a gauge for co2, the pressure will stay the same
(around 800 psi) the whole time until you're almost out of shots, then
it will drop down, and by the time it drops down, you'll only have a
few shots left, so I wouldn't bother. ------------- [IMG]http://i27.tinypic.com/1538fbc.jpg"> Squeeze Box ☣ |
Posted By: hybrid-sniper
Date Posted: 09 July 2005 at 12:16am
| The only way you could tell how much C02 you have left is if you were to somehow get a tank with a guage on it. Are those evenavailable? I dunno. If you were to put the guage on a secondary Regulator, what the guage would be monitoring would be the output PSI into the gun, not how much the tank has left. On my particular setup, my guage on my Reg displays around 200 PSI, regardless of how much air is in my HPA tank. The guage on my tank tells how much air is left, but I don't know if you can find a C02 tank that will do what an HPA tank can. |
Posted By: FyreFly
Date Posted: 09 July 2005 at 1:07am
|
CO2 is not measured by pressure. Since CO2 compresses into a liquid, it is
measured by weight. A gauge on your ASA will be pointless, as Mehs said above. ------------- 
System X NME LE WGP Orracle Cocker Tippmann A-5 E-Grip & LPK Tippmann 98C Flatline & LPK |