liter trig pull and cocking
Printed From: Tippmann Paintball
Category: Tippmann Paintball
Forum Name: New Player Forum
Forum Description: New to the sport? Get Professional Advice Here!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=137574
Printed Date: 07 June 2026 at 2:37pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: liter trig pull and cocking
Posted By: Pro-litey
Subject: liter trig pull and cocking
Date Posted: 10 July 2005 at 3:56pm
|
ok everyone knows the pen spring thing witch is ok cause it works but not that much.so i was reading through some post and i wanted to try something so little by little i started to cut loops off my drive spring. in total i cut about 7or8 loops off so now with out the end cap on my pin and spring the end of the spring is even with the back of the gun(with spring in rear bolt) with all of this and my trigg and sear spring mods i have a hair trigger on my 98c i can hit about 15+ bps now.
!WARNING! do not i repeat do not cut the spring any shorter than that and if you do and you break your gun i am in no way responsible for it. do this mod at your own risk. sry no pics yet but im working on getting em up ------------- -Pro-Lite pen spring on trig & sear -98C Polished Internals DOP 8 Stage X-Core X-Chamber Rocket CockII trig spring mod stretched sear spring -both holes in feed neck shortend drive spring |
Replies:
Posted By: Snake6
Date Posted: 10 July 2005 at 4:09pm
|
Did you try replacing your sear spring with an SL/68 II spring? That works well. ------------- 
|
Posted By: ThunderPants
Date Posted: 10 July 2005 at 4:13pm
|
yeah snake, my friend did that. man his 98 is fast ------------- teamtriggerhappy.com eatonpaint.com wevopaintball.com |
Posted By: Pro-litey
Date Posted: 10 July 2005 at 4:16pm
|
no ive never tried that but it couldnt be that much better if at all than what i did. ------------- -Pro-Lite pen spring on trig & sear -98C Polished Internals DOP 8 Stage X-Core X-Chamber Rocket CockII trig spring mod stretched sear spring -both holes in feed neck shortend drive spring |
Posted By: ThunderPants
Date Posted: 10 July 2005 at 4:20pm
|
yeah you ran the risk of cuttin it too far. with the sl-68 spring, you have less of a chance of screwing up your gun beyond repair ------------- teamtriggerhappy.com eatonpaint.com wevopaintball.com |
Posted By: 98CustomMan0101
Date Posted: 10 July 2005 at 6:33pm
| its not BEYOND REPAIR geez tippy sends new parts out for free. I risk the sear every time n have gotten like 2 new ones also a new bolt trying to make an anti chop 1... worked tho |
Posted By: pachnerg
Date Posted: 10 July 2005 at 7:59pm
|
my friend did the pen spring mod but for some reason it screwed^ his gun and it flew out, his 98c is a walking accident! ------------- b2k4 w/ pds Evil Pipe Kit extreme rage clamping feed neck Halobw/rip drive crossfire 68/4500 Nox Board Dye sticky 3s cp shorty reg ebay valve |