How do i fix my egrip?
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=137608
Printed Date: 19 June 2025 at 4:12pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: How do i fix my egrip?
Posted By: GunSamurai
Subject: How do i fix my egrip?
Date Posted: 11 July 2005 at 12:22am
|
I broke my egrip The Black Wire that goes from the board to the battery
came off at the end that meets the board, now im in big trouble what do
I do?
------------- So, What button draws my gun? Oh we dont get guns, were ninjas, we get "zappers" Wtfs a zapper? Why did we choose ninjas if we dont get guns? Because everyones afraid of ninjas, even black people. |
Replies:
Posted By: ac600ccer
Date Posted: 11 July 2005 at 12:25am
|
send it in, or try to fix it yourself. but you better be able to understand how to solder wires together. ------------- my A-5 setup,sp freak kit,pro-seal powertube,E-grip,cp 45* drop,polished internals,GTA lpk,palmers fatty stab.crossfire 45/4500 ,dye rhino cover,jcs duel trigger |
Posted By: Liquid3
Date Posted: 11 July 2005 at 2:30am
| Ageed, Three minute job if you know how to solder, if not have someone do it for you. |
Posted By: ^Pirate^
Date Posted: 11 July 2005 at 8:06am
You can usually ask a dad or uncle or even a friend or a friend's dad, someone should know how to solder. ------------- 
It aint about black or white becuz we human I hope we see the light before it's ruined My ghetto gospel |
Liquid3 wrote:Posted By: bullseye9
Date Posted: 11 July 2005 at 8:26am
|
ihad the same thing happen yesterday, the black wire goes on the oppsite side of the board from the red. you don't need any more solider, just make sure you have enough wire stripped to reattach it. put a little flux on the wire and heat up the existing solider, once it melts push the wire in. it took longer to remove the grip and heat up the iron then it did to reattach the wire. goodluck ------------- Tippmann A-5 E-Grip JCS DUAL Trigger 14" J&J ceramic 68/4500 bullet drop macro line polished internals LPK The damage done to a man should be such that there is no fear of revenge!!! |
Posted By: bullseye9
Date Posted: 11 July 2005 at 8:27am
------------- Tippmann A-5 E-Grip JCS DUAL Trigger 14" J&J ceramic 68/4500 bullet drop macro line polished internals LPK The damage done to a man should be such that there is no fear of revenge!!! |
Posted By: ^Pirate^
Date Posted: 11 July 2005 at 8:30am
|
We have an edit button.... It should be right down _____________________V -----There. below your sig. ----------------------------------------------------V ____________________________________________V ----------------------------------------------------V ____________________________________________V ----------------------------------------------------V ____________________________________________V ----------------------------------------------------V -------------
It aint about black or white becuz we human I hope we see the light before it's ruined My ghetto gospel |
Posted By: tippy279
Date Posted: 11 July 2005 at 1:39pm
Okay here's what I'd do(I come from a very much do it yourself background.) Go to Radioshack and buy the little 9v adapter and a slodering iron and some solder if you don't have one and solder the old adapter w/ the broken wire out of the board. Then solder the new one in and it will work fine unless you burn something out which would be hard if you are good with a soldering iron. Good LUCk First read about the E-grip or better yet just send it in to them and let them fix it for free.------------- My guns name is Mr. Max in remembrance of my dog that got hit by a car: Tippmann A-5 Ricochet R-5 JCS double Trigger Tippmann E-Grip Flatline Barrel Do you have the need for speed? |