Print Page | Close Window

cleaning it up...

Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=137993
Printed Date: 16 June 2025 at 4:49am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: cleaning it up...
Posted By: SPARTAN 013
Subject: cleaning it up...
Date Posted: 16 July 2005 at 4:31pm
what is the best/ easyest way to oil your gun? (i have an A5)

-------------
no brains, no headache...



Replies:
Posted By: Frozen Balls
Date Posted: 16 July 2005 at 4:52pm
Drop or two in the asa and the bolt. Dry fire a bit to spread the love.

-------------



Posted By: Enos Shenk
Date Posted: 16 July 2005 at 6:12pm
Originally posted by Frozen Balls Frozen Balls wrote:

Drop or two in the asa and the bolt. Dry fire a bit to spread the love.


Is absolutely no replacement for real maintenance.

Just read the manual, its all in there.


-------------


Posted By: Millslane
Date Posted: 16 July 2005 at 8:07pm
if actually want to clean the A-5,

i break mine down and wash everything in the sink. not the internals though. soap and water. rinse and let dry. this will get all the gunk. you'd be amazed as to what can get in there from just one day of play.


-------------
www.pbteamwow.com


Posted By: blackdog144
Date Posted: 18 July 2005 at 1:17pm
ya just do what Millslane said, and oil it, just a drop or two of oil, maybe spread it around and there ya go

-------------
http://imageshack.us">




Posted By: janzevino
Date Posted: 19 July 2005 at 12:51pm
I just picked up the flatline for the A5.  What is the best way to sqeegee the barrel if you break a ball?


Posted By: Giblin
Date Posted: 19 July 2005 at 12:58pm
Originally posted by janzevino janzevino wrote:

I just picked up the flatline for the A5.  What is the
best way to sqeegee the barrel if you break a ball?


Un hook your hopper and feed a squeege down the barel that way. use a
ruber one the others dont seam to like to make the sharp corner. At least
that is how my frined does his with out taking the gun apart.


Posted By: tippy279
Date Posted: 19 July 2005 at 1:41pm
just put a drop or two in the Asa every other time you play and youll be fine.  Also put one drop on the front bolt and then fire like five times and youll be fine.  If you cant figure out how to take it apart for cleaning then pm me cause I have a very detailed set of instruction from experience.

-------------
My guns name is Mr. Max in remembrance of my dog that got hit by a car: Tippmann A-5
Ricochet R-5
JCS double Trigger
Tippmann E-Grip
Flatline Barrel

Do you have the need for speed?


Posted By: Predatorr
Date Posted: 19 July 2005 at 8:16pm
when you run out of the factory oil, go buy some hoppes no. 9.  Its the good stuff.  I too take apart my gun and clean the reciever halves and stuff.  Also i take apart and clean my mast.  you gotta get the lens clean too.   


Posted By: Unicorn
Date Posted: 19 July 2005 at 8:51pm
With the A5, you'll have to remove the barrel for a pull through squeegee. The ones that are just rubber disks are probably the best for the Flatline.


Posted By: Sgt.Tippy<^>
Date Posted: 30 August 2005 at 12:35pm
what happens if you put too much oil in your a5 is it good or bad

-------------
Tippmann A5
Red/Green dot sight
Lapco Bigshot 8.5"
Palmers A5 Stableiser
20oz Gas canister/Anti Syphon


Posted By: The Guy
Date Posted: 30 August 2005 at 12:53pm
the extra oil will just shoot through your gun.

-------------
http://www.anomationanodizing.com - My Site


Posted By: Sgt.Tippy<^>
Date Posted: 30 August 2005 at 1:35pm
Nice boomstick

-------------
Tippmann A5
Red/Green dot sight
Lapco Bigshot 8.5"
Palmers A5 Stableiser
20oz Gas canister/Anti Syphon



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net