center fed top-front cocking 98c
Printed From: Tippmann Paintball
Category: Tippmann Paintball
Forum Name: Marker Gallery
Forum Description: Show us your guns!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=138149
Printed Date: 14 April 2026 at 10:11am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: center fed top-front cocking 98c
Posted By: tigman250
Subject: center fed top-front cocking 98c
Date Posted: 18 July 2005 at 8:16pm
|
been working on this for a while i had to make my own center feed i wanted one that hinged just like stock since no one makes one i had to take matters into my own hands. after that i decided i wanted to cock it in a unique way, top cocking is cool but i wanted something i haven't seen before so after alot of thought i decided to go with a top-front cocking (mabey someone has done this but i haven't seen it). then i wanted to do some custom milling i rounded off the top where the dovetails used to live and filled the bottom where the round part meets the square and created a radius, then i welded shut the original cocking slot, front velocity adjuster hole, warnings and finialy welded shut the rear sight hole. after all the welding and filing was done i finished milling the rear sight and the finger grooves on the foregrip. when the gun was done i turned to the x-chamber i removed almost an inch in length (i removed one of 4 stages to achieve this) to improve the looks. after all that i primed and painted. enjoy
http://img342.imageshack.us/my.php?image=hpim01896pj.jpg">
feel free to rate it and leave your comments if you want to know how i did the centerfeed check it out at the paintapalooza forum here http://paintapalooza.myfreeforum.org/index.php - http://paintapalooza.myfreeforum.org/index.php go to marker gallery and then to FINISHED centerfeed updated 7-7 hope you enjoy looking at it as much as i enjoyed doing it!!!!
------------- http://img76.imageshack.us/my.php?image=stickemup6of.jpg"> 
|
http://img342.imageshack.us/my.php?image=hpim01885gm.jpg">
http://img342.imageshack.us/my.php?image=hpim01878mt.jpg">
http://img342.imageshack.us/my.php?image=hpim01865pj.jpg">
http://img342.imageshack.us/my.php?image=hpim01826lb.jpg">
http://img342.imageshack.us/my.php?image=hpim01795uf.jpg">
http://img342.imageshack.us/my.php?image=hpim01781ap.jpg">
http://img342.imageshack.us/my.php?image=hpim01771am.jpg">
http://img317.imageshack.us/my.php?image=hpim02059eb.jpg">
http://img317.imageshack.us/my.php?image=hpim02041yj.jpg">
http://img317.imageshack.us/my.php?image=hpim02034sv.jpg">
http://img317.imageshack.us/my.php?image=hpim02001en.jpg">
http://img317.imageshack.us/my.php?image=hpim01994rs.jpg">
Replies:
Posted By: pbdude985
Date Posted: 18 July 2005 at 8:37pm
|
dude thats really awsome i dont think i have ever seen a front top cocking tippy. Awsome Job ------------- 
|
Posted By: Snake6
Date Posted: 18 July 2005 at 8:51pm
|
Could you post the specs? Is that a palmer stab? ------------- 
|
Posted By: WKS_weiner
Date Posted: 18 July 2005 at 9:08pm
 -------------  Always Bite the Hand 
|
Posted By: tigman250
Date Posted: 18 July 2005 at 9:08pm
m98c specs are in the sig the hopper is in the mail as we speak, and the x-chamber is a cmi 4 stage cut down to a 3 stage (for looks) other than the R/T, flatline, J&J, hopper, x-chamber everything is homemade. ------------- http://img76.imageshack.us/my.php?image=stickemup6of.jpg">
|
Snake6 wrote:Posted By: TippmannPro13
Date Posted: 18 July 2005 at 9:11pm
|
Nice..... ------------- http://www.sloganizer.net/en/"> 
|
Posted By: Abodame99
Date Posted: 18 July 2005 at 9:23pm
|
How did you do the front top cocking without messing up the linkage arm? Is the linkage arm far enough back to not get in the way? ------------- 98c Double trigger Responce trigger expansion chamber 14" J&J Ceramic rocketcock 2 polished internals Soon to come: Barrel shroud(haven't determined one yet) Magazine Collapsable stock |
Posted By: tigman250
Date Posted: 18 July 2005 at 9:31pm
|
it's a secret!!
just kidding i actually used the connecting rod AS the cocking mech. pretty simple really i'll get a pic up if you would like ------------- http://img76.imageshack.us/my.php?image=stickemup6of.jpg">
|
Posted By: sinisterNorth
Date Posted: 18 July 2005 at 9:50pm
|
Well done ------------- Pumpker'd; (V.) When a pump player runs up and shoots you at point blank range because you thought 20bps made you good. |
Posted By: benttwig33
Date Posted: 18 July 2005 at 10:07pm
|
600000000000000000912 / 10
AWSOME ------------- Sig is WAY too big. |
Posted By: paintbusta
Date Posted: 18 July 2005 at 10:11pm
|
very cool ------------- 
|
Posted By: The Guy
Date Posted: 18 July 2005 at 10:23pm
|
ahh, you got the half ass centerfeed.
------------- http://www.anomationanodizing.com - My Site 
|
Posted By: Project Irene
Date Posted: 18 July 2005 at 11:09pm
| Very nice, alot of custom work. Now get some lp fittings for the r/t and a lpk. |
Posted By: blackdog144
Date Posted: 18 July 2005 at 11:13pm
|
awesome....dang i like it
------------- http://imageshack.us">  
|
Posted By: MetallicaESPa5
Date Posted: 18 July 2005 at 11:16pm
|
Sexy.
------------- 
|
Posted By: Mag-a-Man
Date Posted: 18 July 2005 at 11:20pm
milling was very done well |
Posted By: lester98c
Date Posted: 18 July 2005 at 11:29pm
| cool |
Posted By: dakrshadow200
Date Posted: 19 July 2005 at 1:13am
|
very nice like the silver flames on the sides and the top cocking were did you get that sweet paint job or did you do it yourself ------------- tippy 98c dual trigger r/t system 16 inch CP 2 piece few mods here and thier |
Posted By: Hella Cool
Date Posted: 19 July 2005 at 1:31am
| Nice work. Looks good. Cool flames. |
Posted By: tigman250
Date Posted: 19 July 2005 at 5:41am
|
HUH please explain ------------- http://img76.imageshack.us/my.php?image=stickemup6of.jpg">
|
Posted By: ms2013
Date Posted: 19 July 2005 at 9:42am
|
that is sweet. i like the top cocking, the centerfeed, and the flams.
i think what The Guy was talking about was you did not get it threaded and have feedneck put in. who who cares, it's topcocking and centerfed. and has a cool paintjob.
john. ------------- ProLite M-16 18 AA Ak47 A5 Egrip flatline M-1 Garande Automag 18 AA 98C RT Thompson w/ Drum mag A5 MP5, Egrip, Armson Phantom,Stock, 12gr 98C RT HK33 Flatline UTTER DESTRUCTION OF QUIXTAR! |
Posted By: Barnballer91
Date Posted: 19 July 2005 at 10:19am
thats pretty sweet right there!!!!
|
Posted By: ionic
Date Posted: 19 July 2005 at 10:25am
|
I love the silver flames, 10/10. I don't like those angle drops but thats me. Great job. ------------- http://www.imageshack.us"> 
|
Posted By: ^Pirate^
Date Posted: 19 July 2005 at 10:44am
I  tigman's work.
------------- 
It aint about black or white becuz we human I hope we see the light before it's ruined My ghetto gospel |
Posted By: tigman250
Date Posted: 19 July 2005 at 11:25am
|
thanks for the compliments everyone, did the paint myself
thanks pirate your work isn't too shabby either
------------- http://img76.imageshack.us/my.php?image=stickemup6of.jpg">
|
tigman's work.
got pics of your gun up yet?Posted By: brntcrkr
Date Posted: 19 July 2005 at 11:41am
| very nice |
Posted By: Skillet42565
Date Posted: 19 July 2005 at 11:48am
That gun is an 11 out of 10 in my book... and I WANNA SEE PIRATES GUN  . It better be able to step up to Pandas...------------- 
|
Posted By: tigman250
Date Posted: 19 July 2005 at 12:06pm
cmon pirate we're dying to see it ------------- http://img76.imageshack.us/my.php?image=stickemup6of.jpg">
|
Posted By: ^Pirate^
Date Posted: 19 July 2005 at 12:20pm
Thanks guys, but it'll be awhile I'm about $100 or so short, so I need
to wait until my birthday, which is convienently next month.-------------
It aint about black or white becuz we human I hope we see the light before it's ruined My ghetto gospel |
Posted By: tigman250
Date Posted: 19 July 2005 at 5:33pm
|
awww cmon pirate not even a sneek peek? pm me a pic you're killing me ------------- http://img76.imageshack.us/my.php?image=stickemup6of.jpg">
|
Posted By: tigman250
Date Posted: 19 July 2005 at 9:42pm
here are the pics http://img157.imageshack.us/my.php?image=hpim02435yg.jpg"> ------------- http://img76.imageshack.us/my.php?image=stickemup6of.jpg">
|
http://img157.imageshack.us/my.php?image=hpim02427sp.jpg">
http://img157.imageshack.us/my.php?image=hpim02412rs.jpg">
Posted By: Mag-a-Man
Date Posted: 19 July 2005 at 10:03pm
| nice welding |
Posted By: tigman250
Date Posted: 20 July 2005 at 4:54pm
|
i wasen't real happy with it i was rushed (trying to weld it when the boss wasen't looking) i didn't get an awesome looking bead but in the end it all got filed off anayway ------------- http://img76.imageshack.us/my.php?image=stickemup6of.jpg">
|
Posted By: adriann222
Date Posted: 21 July 2005 at 3:19pm
| I have been trying to figure out how you guys filled in the holes for the rear cocking lever and the original feed port. The center-top-cocking thing seems pretty basic (well too complicated for me, but the idea behind it is basic), so did you guys have to re-mill the whole halfs or did you "fill and drill"? |
Posted By: tigman250
Date Posted: 21 July 2005 at 8:10pm
|
[QUOTE=adriann222]I have been trying to figure out how you guys filled in the holes for the rear cocking lever and the original feed port. The center-top-cocking thing seems pretty basic (well too complicated for me, but the idea behind it is basic), so did you guys have to re-mill the whole halfs or did you "fill and drill"?[/QUOTE] i welded mine most guys use bondo or liquid steel afraid i don't understand your second question, please clarify ------------- http://img76.imageshack.us/my.php?image=stickemup6of.jpg">
|