Flatline&palmers
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Upgrades and Customizing
Forum Description: Trick it out!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=138455
Printed Date: 14 November 2025 at 3:43pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Flatline&palmers
Posted By: A-5Mitch
Subject: Flatline&palmers
Date Posted: 22 July 2005 at 2:41pm
|
hey I have a A-5 and a flatline. I want to get a plamers regulator, but I don't no which tipe to get. Which one fits In-line, Sideline, Female, Male, or Direct???? ------------- new A-5 user |
Replies:
Posted By: Frozen Balls
Date Posted: 22 July 2005 at 3:18pm
|
http://palmer-pursuit.com/online-catalog/flow-chart.html http://palmer-pursuit.com/online-catalog/stabilizer.htm The first link will show you which stab you need for where you want to put it. ------------- 
|
Posted By: A-5Mitch
Date Posted: 22 July 2005 at 3:34pm
|
so since I hace a stock A-5 a direct or a male would work the best for the least amount of money right?? ------------- new A-5 user |
Posted By: Unicorn
Date Posted: 22 July 2005 at 10:35pm
| The male would be the easiest to use with an A5 since it has a built in vertical adapter. No mount or adapter needed. Maybe a 90 degree elbow to attach your gasline, and maybe a different length gasline, but those are both pretty cheap if needed. |
Posted By: HeadshotJester
Date Posted: 22 July 2005 at 11:20pm
|
yea the male is denetly the easiest and cheapest. ------------- http://imageshack.us"> 
Vote for Stewie! |
Posted By: blackdog144
Date Posted: 23 July 2005 at 2:37am
|
male should be the best bet and choice for you
------------- http://imageshack.us">  
|
Posted By: A-5Mitch
Date Posted: 23 July 2005 at 5:59pm
|
cool!! will it still work if I get a remote later? ------------- new A-5 user |
Posted By: Bruce A. Frank
Date Posted: 23 July 2005 at 6:54pm
|
The male will screw right into the bottom of the marker. Later switching to a remote will require some re-plumbing, but will still work with the male. |
A-5Mitch wrote:Posted By: c4eliquid
Date Posted: 23 July 2005 at 7:49pm
| where is a cheap place to buy an A-5 Palmer Stabilizer, preferably the Male Vertical? |
Posted By: HeadshotJester
Date Posted: 23 July 2005 at 9:35pm
|
the re-plumbing the bruce wqas talking about isn't that hard. took me about 10 minutes i would say. ------------- http://imageshack.us">
Vote for Stewie! |
Posted By: Millslane
Date Posted: 23 July 2005 at 10:07pm
|
if you are planning on the remote, then yes, the male will still work. you just have to put the quick disconnect on the palmer, its easy. however, the inline palmer is made for the remote setup. and since its the cheapest once by 30 bucks, you may want to at least look into it. if you are worried about where the inline would go. you can put it right off the tank. or you can mount it using fairely cheap materials found at any gun store. the male is the easiest to mount overall, but its also the most expensive just a thought. buy them at hotshotpaintball.com, they are the cheapest ------------- www.pbteamwow.com |
Posted By: A-5Mitch
Date Posted: 24 July 2005 at 2:37pm
|
but if I get the inline and a remote. how much more will it cost to put it on my gun????? ------------- new A-5 user |
Posted By: Millslane
Date Posted: 24 July 2005 at 10:34pm
|
well, the inline will be 55 bucks and remote is 35 plus shipping. then make 20 or so for a neat mounting mod. but thats up to you. the inlin can alays just screw on the tank, and thats free. ------------- www.pbteamwow.com |
Posted By: hashi2008
Date Posted: 24 July 2005 at 10:53pm
|
With the a5, you could get the male $90 + fittings and hoses $15, or you could get the female and the rings for around $90. It is all preference. If you want the reg to make a foregrip, you can get the male, if you want it to take the place of the asa (air source adapter, or the thing that you c02 screws in) you can get the female. To get the inline, all you need is the reg and a remote. ------------- Founder of the "Forumers Against the Ugly Woman Sigs" also known as FAUWS. |
Posted By: Commander Cool
Date Posted: 24 July 2005 at 11:25pm
|
get the male stabalizer and install it directly into the tombstone, run your stock gasline from the ASA to the input of the reg using a 90 degree elbow and some loctite of teflon tape, if you choose to get a remote later on, you can connect the remote to the stock ASA no problem, no "re-plumbing" as for where to buy? i find county paintball has decent prices on palmer regs, just as low as anywhere else (besides ebay) have fun ------------- 
-=PEACE OUT=- |
Posted By: A-5Mitch
Date Posted: 25 July 2005 at 11:08am
|
thanks guys. if I get a inline and a remote than can I use the remote with N2 later on?? ------------- new A-5 user |
Posted By: Millslane
Date Posted: 25 July 2005 at 11:30am
|
yup
------------- www.pbteamwow.com |
Posted By: A-5Mitch
Date Posted: 25 July 2005 at 11:35am
|
how much psi can a remote stand???????? ------------- new A-5 user |