installing an expansion chamber
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Upgrades and Customizing
Forum Description: Trick it out!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=138958
Printed Date: 10 June 2026 at 7:30am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: installing an expansion chamber
Posted By: DietGarfield
Subject: installing an expansion chamber
Date Posted: 29 July 2005 at 1:24pm
|
I just got my x-chamber today, and I'm trying to put it in,
but I cant seem to get the hose disconnected from the gun. I know i
need 2 wrenches, but what do i turn which way? And any advice to stop leaking, other than loctite, once i got everything in? |
Replies:
Posted By: ShortyBP
Date Posted: 29 July 2005 at 1:29pm
|
Lefty-Loosey.
Turn the hose connection counter-clockwise when facing the hole it's screwed into. They're tough to budge, as the Loctite originally used has a fairly good grip on them. Don't use Loctite when reinstalling the hose. Clean off any remaining remnants of the old loctite, and use teflon tape/plumbers tape. White non-adhesive material which will seal the threading, while allowing you to easily remove the hoses again should you need to. |
Posted By: blackdog144
Date Posted: 29 July 2005 at 3:02pm
|
what gun do you have? if its the 98c remember you need to have the vertical adapter to put an expantion chamber in......
------------- http://imageshack.us">  
|