.68 carbine help
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=138971
Printed Date: 21 December 2025 at 9:07am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: .68 carbine help
Posted By: roader
Subject: .68 carbine help
Date Posted: 29 July 2005 at 3:45pm
| so i just pulled out my carbine and was cleanin it since i wanted to take it out to the woods this weeekend and i start to reasseble when i get to the linkage arm. for some reason it wont fit into the marker right. it wont let me cock the gun if i have it in. i looked at the manual but it didnt seem to help any. i thought maybe i lost something but i looked around the area i was cleaning and nothing was missing. can someone help? reply back here, send me email, or on im would be great. thanks |
Replies:
Posted By: Enos Shenk
Date Posted: 29 July 2005 at 4:05pm
|
You probably have the front bolt in backwards. o-ring faces the barrel. ------------- 
|
Posted By: roader
Date Posted: 30 July 2005 at 5:17pm
|
i figured out what was wrong but my next question is can you use a 98 custom barrell on a .68 carbine marker? |
Posted By: Enos Shenk
Date Posted: 30 July 2005 at 8:11pm
|
Not without a barrel adapter. A5's use carbine threads, so any A5 barrel will fit on your 68. -------------
|
Posted By: roader
Date Posted: 31 July 2005 at 1:37am
| ok thanks, i knew the A5 would fit but i didnt know if that meant the 98 as well as the others would work also. |
Posted By: crashdog121
Date Posted: 07 September 2005 at 9:07pm
|
hey i need a copy of your schematic for a 68 carbine can you help please
------------- Daniel Krull |
Posted By: ShortyBP
Date Posted: 08 September 2005 at 8:32am
|
You can use the schematic from the ProCarbine as a guide. The ProCarbine shares the same design of the 68Carbine, but with the elbow replaced by the foregrip/feed assembly of the ProLite.
http://www.homestead.com/procarbine/faq.html - http://www.homestead.com/procarbine/faq.html |
Posted By: crashdog121
Date Posted: 08 September 2005 at 2:09pm
|
hey thanks
------------- Daniel Krull |
Posted By: jcal6897
Date Posted: 05 December 2010 at 8:50am
| I also have a problem with my 68 carbine. If I remove the barrel and tilt the gun forward, the striker bolt comes out. I don't know if this is normal please help! |
Posted By: defil3d
Date Posted: 05 December 2010 at 4:07pm
|
Hahahaha I did the exact same thing and it's all because one piece was backwards :p -------------  |