A-5 Trigger Help
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=139205
Printed Date: 15 June 2025 at 12:30pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: A-5 Trigger Help
Posted By: darkandstormy_
Subject: A-5 Trigger Help
Date Posted: 02 August 2005 at 5:28pm
|
I just got My Tippmann A-5 about 3 months ago and I have done mod to it every thing were working fine until a few weeks ago, the trigger isn’t returning right, I have a Tippmann double trigger and I can fire once or twice with out it not returning but once I have pulled the trigger a few times its like it dose not return in place. I have to tap the trigger to the side or give it a tap at the back of the trigger to get it back in place, or if I just tap the trigger will I am firing really fast it will for a while. But Once I have tapped it into place you can hear it click (like its back into place). Dose anyone know why it would be doing this. Could it be the drive spring? Or is there something wrong with the rear bolt? Another thing is I just got my Collapsible Stock –its Tippmann made. But when I put it on nothing seams to work. I have to cock it every time it try to fire and push the cyclone to make it fire. This only happens when I put the stock on though any help? The drive spring is the smaller but stronger one?? And the cocking handle spring is the long skinny one??? Thanks Dan A-5 Flat Line 14” Tear Drop Tippmann Double Trigger Expansion Camber Polished Internals Offsightrail Red Dot Sight Collapsible Stock |
Replies:
Posted By: Millslane
Date Posted: 02 August 2005 at 9:33pm
|
you have the springs right. longer skinny one is the cocking spring. smaller fatter one is the drive spring.
------------- www.pbteamwow.com |
Posted By: darkandstormy_
Date Posted: 02 August 2005 at 11:43pm
| k thanks now dose any one know why it is doing what i have posted above |
Posted By: rossy11223
Date Posted: 02 August 2005 at 11:47pm
| It sounds like something is wrong with your trigger but I don't know what. Try taking it to a proshop and let them examine it. |
Posted By: Millslane
Date Posted: 02 August 2005 at 11:58pm
|
do you still have the stock trigger? put it back in and see it that changes anything. ok, check this out...this is just off the top of my head so here it goes... take the trigger apart, it getting caught on something. i think the sear and the trigger are getting snagged somehow. your double trigger should have a silver metal piece on it thats held in by a small rod. the silver metal piece it what trips the sear when you pull the trigger. make sure its ok. you said you have done alot of mods to it. what kind of mods? are these trigger mods? which ones if so. as far as the stock problem goes, i am going to assume that you have the drive pin and drive spring all in place properly, if not, then go fix it. is there an oring? it might go aound the end of the stock that goes into the gun. look for a slot for it. make sure its there and is ok. if theres no slot, then the oring just sits inside the marker, inbetween the valve and the stock, for padding and sealing. its not stayinf cocked because theres not enough pressure on the spring. try adding a copper bb or two, into the stock end where the drive pin would go, theres a little hole there. then put the pin and spring back on. ------------- www.pbteamwow.com |
Posted By: darkandstormy_
Date Posted: 04 August 2005 at 3:44pm
|
I didn’t mean a lot of mods just a few. Um I look in side and it doesn’t look like any thing is caught on any thing. But the bbs did work on the stock thanks... any one else know what to do for the trigger?? |
Posted By: Yomillio
Date Posted: 04 August 2005 at 4:45pm
|
when it does fire, do the balls go a normal distance? ------------- 
http://www.tippmann.com/forum/wwf77a/forum_posts.asp?TID=172327 - Forum XBL Gamertag Collection |
Posted By: darkandstormy_
Date Posted: 05 August 2005 at 9:51am
|
ya when it does fire the ball go normal distance. |
Posted By: tippy279
Date Posted: 05 August 2005 at 1:50pm
|
Maybe stretch out the spring and make sure the drive spring and cocking spring are in the correct places. If that doesnt help then take to the proshop. ------------- My guns name is Mr. Max in remembrance of my dog that got hit by a car: Tippmann A-5 Ricochet R-5 JCS double Trigger Tippmann E-Grip Flatline Barrel Do you have the need for speed? |
Posted By: tippy a5
Date Posted: 06 August 2005 at 8:35pm
|
if u have to many mods of one thing like a pre trigger stop it has to go forward so far to reset so just try taking out all of ur mods ------------- Tippmann A5 Tippmann double trigger Smartparts Progressive 16" E-Grip Empire reverse spike Jersey 05' Proto Pants PMI 72/3000 Soon to Come WAS board reg QEV mod new barrel |
Posted By: bullseye9
Date Posted: 08 August 2005 at 9:55pm
|
call tippmann they have modified the sear. with a round hole instead of an oval one. ------------- Tippmann A-5 E-Grip JCS DUAL Trigger 14" J&J ceramic 68/4500 bullet drop macro line polished internals LPK The damage done to a man should be such that there is no fear of revenge!!! |