32 degrees coil
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Upgrades and Customizing
Forum Description: Trick it out!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=139589
Printed Date: 27 May 2026 at 12:26am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: 32 degrees coil
Posted By: Konig42
Subject: 32 degrees coil
Date Posted: 08 August 2005 at 3:41pm
|
I recently purchased a 32 degrees coil and was wondering if anyone else
has one that could tell me how to use it.... yea, iv never used a
remote coil before so idk much about them and the included directions
are vague. I know I have to skrew one end on the co2 can, but
what is the knob for? then there is a quick detach part which i attach
to the coil then skrew into the gun. What is a slide check and
does it already have one on? (if n0t are there any specs as to what I
should look for and how much they cost?) also, while i think i know
what an ASA is, what does the acronym stand for? Also, with the
coil, what is the procedure for attaching/detaching regarding safety
and pressure and such.....wow, i feel just a lil bit spetha axin all
this..... ------------- Early bird gets the worm, second mouse gets the cheese! ________________________________ 98C RT Exp. Chmbr pen spring trig HaloTSALED double trigger Flatln stock bkup J&J 14" bbl str fire b |
Replies:
Posted By: SuzukiRider987
Date Posted: 08 August 2005 at 4:02pm
|
ASA means air source adapter. As for the remote I'm not the best one to explain it. ------------- http://www.macdev.net - MacDev Militia http://www.alienpb.com - Alien - Because winning is more fun. |
Posted By: Giblin
Date Posted: 08 August 2005 at 4:14pm
|
OK hers the best I can do
Frist there should be a round threde piece witch the quick conect snaps on to you screw that into the gun. Second make sure the nob on top of the tank part is out far enough that the pin in the midel is flush with the top of the inside part (I put my finget in the tank end of the coil were the threds are and back out the nob on top till the pin is flush with the top) then screw the tank end on the tank( dont panic the pin is not down it will not let air out.) Third snap the quick conect on to the adapter to the gun. Forth Screw the nob down on the top of the tank this will push the pin down and alow air in the gun. To remove I turn the air off by unscrewing the nob on the top of the tank. make sure the gun has no pain in it and fire it till the gun is out of air. Then un do the quick conect and unscrew the tank from the coil. Ther I hope you understand all this |
Posted By: Konig42
Date Posted: 08 August 2005 at 5:08pm
|
thank you that helped quite a bit actually.. the only questions that
remain are about the slide check and what happens if the line is
still pressurised while disconneected. tnx
------------- Early bird gets the worm, second mouse gets the cheese! ________________________________ 98C RT Exp. Chmbr pen spring trig HaloTSALED double trigger Flatln stock bkup J&J 14" bbl str fire b |
Posted By: Giblin
Date Posted: 08 August 2005 at 5:14pm
Slid check i think (dont qoute me on this im not sure mine dose not have this) is a way to release the air presue out of the coil with out firing the gun. If you disconect the coil wile pressuriesed you will drain your tank. Dont worry I cant get the quick conect of my gun with out depressurising my gun there is to much prusser in the coil to alow you to do this. |
Konig42 wrote:Posted By: triggerhappy1
Date Posted: 08 August 2005 at 6:20pm
|
With the slide check thing, sliding it one way shuts off the flow, the other way opens flow. Dont know which way is which. To find out, put your tank on the remote line not on the gun and just turn the knob so it leaks a little. Then slide it back and forward and see which way stops flow. Then when it in your gun, slide it to stop flow, shoot out the air, and dis connect. Then you can reconnect, slide it on, and your ready to fire. ------------- 
|